Area of application:
+ air and non-aggressive gases
+ controlling, measuring and monitoring
+ climate and ventilation
+ environmental and medical technology
Types of pressure:
Absolute pressure (vacuum used as reference) for measuring over pressure over absolute zero (sensor displaying barometric air pressure when coming into contact with atmospheric pressure).
Relative pressure (reference atmosphere or ambient pressure) for over/under pressure measurements and pressure difference measurements (sensor displaying zero when coming into contact with atmospheric or ambient pressure).
The above mentioned price is valid for the version GMUD-MP-S.
Technical data:
Sensor element: piezoresistive pressure sensor with integrated temperature compensation
| Relative fine pressure range: |
Measuring range |
Overload |
Burst pressure |
| MP-F-MR0 |
0.000 - 1.000 mbar rel. |
150 mbar |
200 mbar |
| MP-F-MR1 |
0.00 - 10.00 mbar rel. |
150 mbar |
200 mbar |
| MP-F-MR2 |
0.00 - 20.00 mbar rel. |
150 mbar |
200 mbar |
| MP-F-MR3 |
-1.999...+2.500mbar rel. |
250 mbar |
500 mbar |
| MP-F-MR4 |
-19,99...+20,00mbar rel. |
150 mbar |
200 mbar |
| |
Optimized special ranges possible: see option - MBF (e.g. -15 ... +15 mbar) |
| Relative pressure range: |
Measuring range |
Overload |
Burst pressure |
| MP-S-MR0 |
0.0 - 100.0 mbar rel. |
1000 mbar |
1500 mbar |
| MP-S-MR1 |
0.0 - 500.0 mbar rel. |
1000 mbar |
1500 mbar |
| MP-S-MR2 |
0 - 1000 mbar rel. |
2000 mbar |
3000 mbar |
| MP-S-MR3 |
0 - 2000 mbar rel. |
4000 mbar |
6000 mbar |
| MP-S-MR4 |
0 - 5000 mbar rel. |
7000 mbar |
7000 mbar |
| MP-S-MR5 |
-100.0...+100.0mbar rel. |
1000 mbar |
1500 mbar |
| MP-S-MR6 |
-500...+500 mbar rel. |
1000 mbar |
1500 mbar |
| MP-S-MR7 |
-1000...+1000 mbar rel. |
2000 mbar |
3000 mbar |
| Absolute pressure range: |
Measuring range |
Overload |
Burst pressure |
| MP-S-MA0 |
0 - 1100 mbar abs. |
2000 mbar |
3000 mbar |
| MP-S-MA1 |
0 - 2000 mbar abs. |
4000 mbar |
6000 mbar |
| |
Optimized special ranges possible: see option - MBS (e.g. -350 ... +350 mbar) |
Please specify the desired standard measuring range when ordering!
Typ. accuracy: GMUD MP-S: ±0.15% FS (lin.),
±0.6% FS (hysteresis and temperature 0 ... 70°C)
GMUD MP-F: ±0.35% FS (lin.),
±0.6% FS (hysteresis and temperature 0 ... 70°C)
Output signal: 4 ... 20mA / 0 ... 10V (selectable in menu)
Auxiliary energy: only needed if 0...10V output signal is
selected (18 ... 30VDC / 24VAC)
Permissible burden: (4 ... 20mA): Ra[Ohm] = (Uv [V] - 12 [V]) / 0.02A
Permissible load: (0 ... 10 V): = 3000 Ohm
Operating temperature: -20 ... +70°C
Storage temperature: -40 ... +70°C
Display / operation: 4-digit 7-segment display and 3 buttons
Pressure connection: universal pressure connecting pieces for 6 x 1mm or 8 x 1mm plastic tubes (4 or 6mm inner pipe diameter)
Mounting position: any position (small influence of mounting position for low ranges)
Housing: ABS (IP65), with fi xing holes for wall mounting
(accessible after cover has been removed)
Electric connection: elbow-type plug acc. to EN 175301-803/A (IP65);
max. wire cross section: 1.5mm2 ,
wire/cable Ø: 4.5mm to max. 7mm
Options:
LACK: card coated on both sides (for outdoor application)
OUT: switching output (max 28V, 40mA), switches if meas. value falls below or exceeds limit value connection via 2nd elbow-type plug
WE: default settings according to customer's specifi cations, includes: output signal, measuring range, default state in case of error (without upcharge if together with MBF / MBS)
MBF: option any fi ne pressure range range < 25mbar
please state desired measuring range
MBS: option any pressure range range > 30mbar … 5000mbar
please state desired measuring range
