N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm

Measurement: current and DC voltage up to 5A and 600V
Three-colour display (14mm high), programmed in three intervals of the measured value
Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
Four alarm outputs with signalling by LED diodes, operating in 6 different modes
Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
Storage of minimal and maximal values for all measured quantities
21-point individual characteristic for the measured value

from

163,22 €

incl. 19% VAT , plus

This item has variations. Please select the requested variation.

The N30H is a programmable digital panel meter for direct current up to 5A and direct voltage up to 600V.

The meter is available in different versions which differ in power supply and output type (please select when ordering!).

Technical data:

Inputs (selectable by programming): -600...+600VDC

-103...+130VDC

-6...+6ADC

-2...+2ADC

Real time clock: 00.00...23.59

Outputs: 2 x relays, voltage-free NO contacts, 250VAC/0.5AAC (standard)

2 x relays, voltage-free changeover contacts, 250VAC/0.5AAC (additional option)

Analog outputs: 0/4...20mA and 0...10V (additional option)

Transistor output passive NPN, open collector, 30VDC/30mA (additional option)

Power supply: 85...253VAC/DC or 20...40VAC/DC

Interface: RS-485, MODBUS RTU

Display: 5-digit LED, 14mm high

Ambient temperature: -25...23...+55°C

Storage temperature: -33...+70°C

Operating air humidity: 25...95% RH, non-condensing

Weight: <0.2kg

Dimensions: 96mm x 48mm x 93mm

Housing protection: IP65 front, otherwise: IP10

Please note:

When placing your order, please indicate the desired unit of measure, e.g.: V, mA, bar, km/h or others!

There are no reviews yet.