Phoenix Inverter Compact 12/1200 230V VE.Bus
SinusMax – top technology
The inverter series was developed for commercial use and is suitable for a wide range of applications. The development aimed uncompromisingly at an inverter with a clean sine wave output and high efficiency. By using the latest hybrid HF technology, it was possible to present a quality product with compact dimensions and low weight that can easily deliver any desired power.
Highest starting power
A key feature of SinusMax technology is the particularly high starting power. This is not possible with conventional HF technology. The inverters are able to cope with the high starting currents of e.g. cooling compressors, tool motors and the like.
Practically unlimited power through parallel connection and three-phase operation
Up to six inverter units can be connected in parallel to increase performance. For example, six 24/5000 units can deliver 24kW / 30kVA power. Three-phase operation is also possible.
Load transfer to other AC sources: The automatic load transfer switch
For smaller power outputs, we recommend the Filax automatic transfer switch. This means that computers and other sensitive electronic devices can continue to operate with virtually no interruption, as the switching times are very short (less than 20ms).
Communication interface
These larger inverter models are equipped with a VE.Bus connection. All you need to connect them to your PC is our MK3-USB VE.Bus-to-USB interface (optional accessory).
Together with our VictronConnect or VEConfigure software, which can be downloaded free of charge from the manufacturer's website, the parameters of the inverters can be customized.
This includes output voltage and frequency, overvoltage and undervoltage settings and programming the relay. This relay can be used, for example, to signal several alarm conditions or to start a generator. The inverters can also be connected to a GX device (e.g. Cerbo GX) for monitoring and control.
Novel applications of high-performance inverters
The possibilities with parallel-connected inverters are truly amazing!
Photos similar.
Technical data:
Input voltage range: 9.5 - 17VDC
Output voltage: 230VAC ±2% / 50Hz ±0,1%
Continuous output power at 25ºC: 1200VA / 1000W
Programmable relay: Yes
Remote controlled ON/OFF switch: Yes
Operation temperature: -40 to +65°C (fan cooling)
Operation air humidity: max. 95% RH, non- condensing
Housing material and colour: Aluminium, blue
Housing protection rate: IP21
Battery connection: 1.50m battery cable (supplied)
230VAC connection: G-ST18i plug
Weight: 10kg
Dimensions: 375 x 214 x 110mm³ (H x W x D)
Security: EN 60335-1
Emission/Immunity: EN 55014-1 / EN 55014-2
Automotive directive: 2004/104/EC
