RS-485/MODBUS Components

SM5, RS-485 MODBUS Module with 8 Binary Inputs
SM5, RS-485 MODBUS Module with 8 Binary Inputs
SKU:
SM5ff
Variations in:
  • Supply Voltage
  • 8 relay logic inputs, to be read out through RS-485/MODBUS
  • Information about the operating machine state to monitoring systems and PLC
  • Signalling of interface operations by LEDs
  • Configuration through the free LPConfig software
  • DIN rail mounting
  • 3 years warranty
    • LUMEL
    SM5, RS-485 MODBUS Module with 8 Binary Inputs
    133,85 € - 156,98 € *
    Go to item
    SM4, RS-485 MODBUS Module with Logic Outputs
    SM4, RS-485 MODBUS Module with Logic Outputs
    SKU:
    SM4ff
    Variations in:
    • Supply Voltage/Outputs
  • Remote control of actuatiors from monitoring systems or PLC
  • 8 open collector outputs or 4 relay outputs, controlled via RS-485/MODBUS
  • Configurable baud rate
  • Configuration through free LPConfig software
  • Full galvanic separation between outputs (for relay outputs)
  • DIN rail mounting
  • 3 years warranty
    • LUMEL
    SM4, RS-485 MODBUS Module with Logic Outputs
    137,15 € - 178,45 € *
    Go to item
    SM3, RS-485 MODBUS Module with 2 Binary Inputs
    SM3, RS-485 MODBUS Module with 2 Binary Inputs
    SKU:
    SM3ff
    Variations in:
    • Supply Voltage
    • Conversion of logic states or pulses into RS-485 MODBUS
    • Two programmable logic or counter inputs
    • Auxiliary counters with reset possibility
    • Counter state strored in non-volatile memory
    • Configurable data transfer rate
    • DIN rail mounting
    • 3 years warranty

    LUMEL
    SM3, RS-485 MODBUS Module with 2 Binary Inputs
    115,67 € - 123,94 € *
    Go to item
    SM2, RS-485 MODBUS Module with 4 Analogue Inputs
    SM2, RS-485 MODBUS Module with 4 Analogue Inputs
    SKU:
    SM2ff
    Variations in:
    • Input Variant / Supply Voltage
  • 4 analogue input channels
  • 4 Input channel variants
  • Conversion of analogue signals into numerical data
  • Programming via RS-485 or RS-232 interface
  • Mathematical operations Operationen on channels and between measuring channels
  • Conversion of measured or calculated quantities based on the individual linear characteristic
  • Storage of maximum and minimum values for both channels
  • Programming of the measurement averaging time
  • Programmable digital filters, independent for each channel
  • 2 programmable open-collector alarm outputs
  • Servicing of RS-485 and RS-232 interfaces in MODBUS protocol, both in ASCI and RTU mode
  • DIN rail mounting
  • Supply voltage 85-253VAC/DC or 20-50VAC/DC
  • 3 years warranty
    • LUMEL
    SM2, RS-485 MODBUS Module with 4 Analogue Inputs
    251,16 € *
    Go to item
    SM1, RS-485 MODBUS Module for 2 Analogue Inputs
    SM1, RS-485 MODBUS Module for 2 Analogue Inputs
    SKU:
    SM1ff
    Variations in:
    • Input Variant / Supply Voltage
  • 2 analogue input channels
  • 4 Input channel variants
  • Conversion of analogue signals into numerical data
  • Programming via RS-485 or RS-232 interface
  • Mathematical operations Operationen on channels and between measuring channels
  • Conversion of measured or calculated quantities based on the individual linear characteristic
  • Storage of maximum and minimum values for both channels
  • Programming of the measurement averaging time
  • Servicing of RS-485 and RS-232 interfaces in MODBUS protocol, both in ASCI and RTU mode
  • DIN rail mounting
  • Supply voltage 85-253VAC/DC or 20-50VAC/DC
  • 3 years warranty
    • LUMEL
    SM1, RS-485 MODBUS Module for 2 Analogue Inputs
    182,78 € *
    Go to item
    S4AO, RS-485 MODBUS Module with 4 Analogue Outputs
    S4AO, RS-485 MODBUS Module with 4 Analogue Outputs
    SKU:
    S4AOff
    Variations in:
    • Analogue Outputs/Supply Voltage
  • Conversion of RS-485 MODBUS data into standard signals in 4 channels (current 0/4...20 mA or voltage 0...10 V).
  • Possibility of connection via internal RS-485 port in order to increase no of analog outputs in other devices.
  • Two independent communication ports (possibility to work as Master/Slave)
  • Master MODBUS function dedicated to read out data from other RS-485 devices and to scale analog value
  • Slave MODBUS function to set the signal on analog outputs
  • Outputs working time counter
  • DIN rail mounting
  • Galvanic separation between 2 groups of outputs
  • Possibility of configuration through USB without power supply
  • 3 years warranty
    • LUMEL
    S4AO, RS-485 MODBUS Module with 4 Analogue Outputs
    264,38 € *
    Go to item
    S4AI, RS-485 MODBUS Module with 4 Analogue Inputs
    S4AI, RS-485 MODBUS Module with 4 Analogue Inputs
    S4AI, RS-485 MODBUS Module with 4 Analogue Inputs
    SKU:
    S4AIff
    Variations in:
    • Inputs/Supply Voltage
  • Processing 4 analog signals (standard signals or different temperature sensors) to RS-485 MODBUS
  • Programmable individual characteristics of the inputs
  • Operation in Modbus Slave mode
  • Possible  connection to the internal lateral RS-485 port
  • Two programmable alarm outputs
  • Mathematical functions: addition, subtraction, multiplication, division, average, minimum, maximum
  • Two virtual measurement channels to perform mathematical functions on the channels or between the measurement channels
  • Programmable operating time counters
  • DIN rail mounting
  • Galvanic isolation between inputs divided into 2 groups of 2 inputs
  • Possibile configuration via USB (power supply of the module is not required therefore)
  • 3 years warranty
    • LUMEL
    S4AI, RS-485 MODBUS Module with 4 Analogue Inputs
    234,24 € *
    Go to item
    PD9W, Industrial RS232/RS485 into WiFi/Ethernet Media...
    PD9W, Industrial RS232/RS485 into WiFi/Ethernet Media Converter
    SKU:
    PD9W
    • 1x RS232 port for RTS/CTS signals
    • 1x RS485
    • 802.11b/g/n WiFi support
    • 1x Ethernet WAN/LAN port
    LUMEL
    PD9W, Industrial RS232/RS485 into WiFi/Ethernet Media Converter
    216,96 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    PD9, RS485/ETHERNET Converter
    PD9, RS485/ETHERNET Converter
    SKU:
    PD9
    • Two communication interfaces: 1x RS485, 1x Ethernet WAN/LAN
    • Simple configuration via webpage or tool software
    • Compact size designed for DIN rail mounting
    • Work modes: TCP server, TCP client, UDP server, UDP client 
    • Support Modbus RTU to TCP, Modbus Polling
    • Support DHCP, dynamic or static IP
    • Watchdog function
    • Wide working temperature range from -40 to 85°C 
    • Upgrade firmware via network
    LUMEL
    PD9, RS485/ETHERNET Converter
    165,23 € *
    Go to item
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    PD51, RS-232/RS-485 Interface Converter/Repeater
    PD51, RS-232/RS-485 Interface Converter/Repeater
    SKU:
    PD51ff
    Variations in:
    • Supply Voltage
  • Conversion of an RS-232 interface into an industrial RS-485 interface
  • Enables the increase of the bus range and the number of devices in the RS-485 network
  • Ensures the automatic control of the data flow direction
  • In order to protect devices at both sides of interfaces, a galvanic separation is applied in the converter
  • Further use of the device as an RS-485 repeater
  • DIN rail mounting
  • 3 years warranty
    • LUMEL
    PD51, RS-232/RS-485 Interface Converter/Repeater
    108,53 € - 117,32 € *
    Go to item