Telemetry
- Replaces the models MT-020 and MT-021
- 2G/3G or 2G/4G (Cat M1, NB1) or 2G/4G Cat 1 data packet transmission
- Embedded GSM modem
- 4 Binary inputs/counting
- 4 Relay outputs
- Configuration port with jack 3,5 mm socket
- 1-Wire input
- DIN rail mounting
- Configurable via SMS commands
- Datalogger (up to 28k records)
- Removable terminal blocks
- Communication port RS-485 (option)
•Programming according to INTERNATIONAL STANDARD IEC 61131-3
•Embedded GSM 2G/4G modem
•Dual-SIM technology (passive) - access to 2 independent GSM networks ensures superior availability
•8 binary inputs (galvanic isolation)
•8 configurable binary inputs / outputs (galvanic isolation)
•3 analog inputs 4-20mA (galvanic isolation)
•1 analog output 4-20mA (galvanic isolation)
•Ethernet port 10Base-T/100Base-TX
•RS-232/485 serial port for external devices
•Diagnostic LEDs
•Redundant power inputs
•Real Time Clock (RTC)
•Data logger with 0.1s resolution
•Standard communication protocols (Modbus RTU, Modbus TCP)
•FlexSerial - programmable handling of non-standard serial protocols
•Remote configuration, programming, diagnostics and firmware upgrade (OTA)
•Industrial design, DIN rail mounting, screw terminals
•3-year warranty
- Telemetry module with OLED display and HMI
- Embedded GSM modem
- Dual-SIM technology
- Functionality as PLC, data logger, protocol converter and wireless communication interface
- 16 binary inputs
- 12 binary outputs
- 4 analog inputs 4-20ma
- 2 analog ingputs 0-10V
- Battery buffered power supply
* Ethernet port: 100Base-TX/10Base-T with auto MDI/ MDI-X
* Configure using dedicated MTManager software, WebGUI interface or SSH
* 2 serial ports to communicate with external devices:
* Programmable logic controller (PLC)
* 4 binary inputs/2 configurable as binary outputs
* Data logger with 0,1 s resolution (microSD card support)
* Protocol converter (supports Modbus RTU, Modbus TCP, UDP)
* Built-in Modbus Master and Slave functionality
* Modbus packet routing
* SNMP v2c/v3 and SNMP Trap protocols support
* Diagnostic LEDs
* Advanced self-diagn9stic with watchdog
* Built-in event processor for data rules transmission
* SMS gateway
* Redundancy power supply inputs
* Optional MIM card
* 10.8-53VDC power supply
* Real time clock (RTC)
* Industrial design, DIN rail mounting, screw terminal blocks
* LTE Rx auxiliary antenna to improve signal reliability and quality