Fine manometer, suitable for gas pressure measurements in the area of heating/ventilation/air conditioning (HVAC), e.g. for gas and burner pressures (pressing), chimney draft measurement, preparation of the 4Pa test, blower door, filter test (e.g. automotive DPF, fuel cell filter), replacement for U-tube manometer etc.
The instrument offers precision, speed and reliability in a compact, ergonomic housing.
It also impresses with its waterproof design according to IP67 (not for the pressure connections), as well as the illuminated 3-line display, which also offers an overhead display at the push of a button.
The measuring range up to 200hPa and the high resolution up to 0.1Pa in the optimized fine pressure mode covers the essential applications in the area of gas pressure (150hPa) and burner settings (e.g. 5Pa) in one device. The high accuracy simplifies, among other things the dynamic pressure setting and is also suitable for draft measurements. The measured value is independent of the position.
The meter has a 1/8" universal port for the use of different pressure connections.
It is available in four variants (please select when ordering):
-UT: 2 x UT pressure connection for hoses 6 x 1mm (4mm inside) and 8 x 1mm (6mm inside)
-QC6: 2 x QC6 Quick Connect- connection for 6 x 1mm (±4mm inside) hoses
-ST6: 2 x ST6 Screw connection for 6 x 1mm (±4mm inside) hoses
-MCM: 2 x MCM mini quick-release connector for quick-release couplings
Technical data:
Measuring ranges: -200.0Pa to +200.0Pa (Lo)
-200.0hPa to +200.0hPa (Hi)
Units selectable: Pa, hPa, mmHg, PSI
Measuring frequency: 2.5 measurements/s (Slow)
25 measurements/s (Fast)
Overload: max. ±1700hPa
Accuracy (device): ±0.1% FSS typical at nominal temperature +25°C
±1% FSS max.
Measuring inputs: 2 universal ports for screwing in various pressure connections
Housing protection: IP67 (pressure connections must be protected from dirt and moisture)
Display: 3-line, with battery status display, background lighting, protected by a break-proof pane, overhead display at the push of a button
General additional functions: HOLD, Min/Max
Additional special functions: Tare
High resolution measurement with 0.1Pa (Fine)
Average value mode for measuring strongly fluctuating pressures
Ambient temperature: -20 to +50°C
Battery: 2 x AA batteries
Battery lifetime: ca. 3000h
Housing: break-proof ABS plastic
Dimensions: 108 x 54 x 28mm³ (H x W x D) without pressure connections
Weight: ca. 150g including batteries
Scope of delivery: Device, batteries, operating instructions, test report
Optional accessories:
ST-G1000 protective bag made from Nappa leather, with belt clip
other connection adaptors: UT, QC6, ST6 or MCM
