HD30.S1, Probe for the Visible Spectral Range (380 - 780nm)
Two suitable probes are available for the HD30.1 spectroradiometer data logger:
The probe HD30.S1 analyzes the visible spectral region (380nm-780nm) and calculates the following photo-colorimetric quantities:
-
Illuminance [lux],
-
Correlated Color Temperature CCT [K],
-
Trichromatic Coordinates [x,y] (CIE 1931) or [u’,v’](CIE1978),
-
CRI (colour rendering index, R1…R14, Ra),
-
PAR [µmolphot/sm²]
The probe HD30.S2 analyzes the ultraviolet spectral region (220nm-400nm) and calculates the following radiometric quantities:
-
UVA Irradiance (W/m² ),
-
UVB Irradiance (W/m² ) and
-
UVC Irradiance (W/m²)
The probes are not included in the scope of delivery of the data logger and must be ordered separately!
The technical data below are obtained when the probe is connected to the HD30.1 data logger.
Technical data of the HD30.S2:
Sensor: CCD linear (2048 elements)
Spectral field: 220nm - 400nm
Type of spectrometer: Based on diffraction grating in transmission
Numerical aperture: 0.16
Inlet slit: 70µm
Band-pass: 2.5nm
Wavelength accuracy: 0.3nm
Reproducibility of the wavelength: 0.1nm
Averaging time: from 1ms to 4s
Averaging mode: Automatic / Manual
Diffused light: <0.03%
Measuring mode:
Spectral Irradiance,
UVA Irradiance,
UVB Irradiance,
UVC Irradiance,
Spectral Transmittance
Type of measure:
Single: single acquisition with data backup
Continue: continuous acquisition with data backup
Monitor: continuous acquisition without saving data
Logging: acquisition at time intervals
(from 3min to 60min) with data backup
Optical input dimensions (opaline quartz diffuser): Ø11.8mm
Cosine correction: By means of opaline quartz diffuser (2mm)
Calibration: Deuterium Standard Lamp
Working field: Illuminance 5-70,000 lux
Uncertainty:
Spectral irradiance: ±15%
UVA irradiance: ±6%
UVB irradiance: ±8%
UVC irradiance: ±10%
CRI: ±1.5
Operating system: Linux
Display: 4.3’’ touchscreen (480x272 pixels)
Data storage: Internal (150MB), micro SD card, USB key (not supplied)
PC connection: via Ethernet cable, via mini USB connector
Power supply: Rechargeable battery - external power supply (SWD05) and USB/DC cable (CP30)
Exported data format: Compatible with the best known management software /data analysis
Dimensions / weight of the indicator HD30.1: 135x156x42mm³ - 440g
Dimensions / weight of the probe: 75x150x74mm³ - cable length 1.5m - 370g
Working temperature: 0 to +40°C
Upgrade: Automatic via internet
Scope of delivery:
The 1.5 m cable with 8-pole M12 connector for the connection to the data logger is included.
Supplied with calibration report.
