JBC 1-Channel Soldering Station ALE-210VA, with Automatic Solder Wire Feed
The ideal solution for soldering jobs where you need to have your hands free! The soldering station works with the comfortable ALE250 auto-feed soldering iron and the C250 cartridge range.
The new, improved 7-key keyboard allows you to configure parameters such as the speed and length of the soldered wire. Thanks to the integrated counter, solder consumption can also be monitored.
In "Continuous Mode", the solder wire is fed while the button is held down. In "Discontinuous Mode", the speed and amount of solder wire fed with each click can be configured. In "Program Mode", the operator can configure three
consecutive feed steps for more dynamic and efficient soldering. Up to five programs can be set.
The solder wire feeder is equipped with a small blade that perforates the solder wire as it is fed to the flux core. This perforation process allows for better flux flow and outgassing, preventing solder and flux splashing during soldering.
Main features:
- with automatic solder wire feed
- three working modes adjustable
- intelligent heat management
- user-friendly operating menu
- connection options for JBC extraction systems and foot pedal to achieve the best soldering results
- various soldering jobs can be carried out safely in just a few seconds without switching off the station
- compatible with solder wires from Ø0.4mm to Ø1.8mm, using the corresponding solder wire guide set
- soldering tip family C250
Technical data:
Dimensions L x W x H: 235 x 170 x 112mm
Feed speed: max. 50mm/s
Wire Ø: 0.4-1.8mm
Wire length: max. 250mm
Heat-up time: 4.1s (35°C-315°C).
Scope of delivery:
1 x control unit ALE
1 x soldering iron ALE250 without soldering tip
1 x storage stand ALES
1 x soldering cartridge C250403/Ø1.0mm
1 x soldering wire guide set GALE10V
1 x cartridge holder SCH
1 x foot pedal P405
1 x soldering cartridge pliers PLR195
