Modell 8100 Plus, pH & Temperature Meter Kit
The kit consists of the following components:
-
8100 Plus pH meter (225-085)
-
temperature oprobe (170-100)
-
general purpose pH electrode (823-501)
-
4.01 pH buffer solution (816-050)
-
7.00 pH buffer solution (816-051)
-
carrying case (830-080)
Characteristics of the Model 8100 Plus pH & Temperature Meter:
- robust waterproof case to IP66/67
- manual / automatic temperature compensation
- integrated rubber seal for durability
- simple pH re-calibration
The new 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display that indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH, mV over the range of -999 to 999 mV and temperature over the range of -39.9 to 149.9 °C with a resolution of 0.1 °C. The LCD display features both low battery indication and an optional backlight.
The pH readings are either manually or automatically temperature compensated over the operating range of 0 to 50 °C. To automatically compensate, it is necessary to utilise a thermistor temperature probe. Each unit incorporates an auto-power off facility that automatically turns the instrument off after ten minutes, maximising battery life.
The 8100 Plus has an integrated rubber seal to ensure complete water resistance and helps to reduce the possibility of damage in harsh environments.
At the touch of a button, the instrument will automatically re-calibrate itself when used in conjunction with pH buffer solutions.
Each unit incorporates an easy to use BNC connector and waterproof Lumberg screw-locking type connector, allowing a wide range of interchangeable pH electrodes and thermistor probes to be used.
Attention: For redox measurements an optional redox electrode is needed.
| |
pH
|
mV
|
temperature
|
|
range:
|
0 to 14pH
|
± 999mV
|
-39.9 to +149.9°C
|
|
resolution:
|
0.01pH
|
1mV
|
0.1°C
|
|
accuracy:
|
±0.02pH
|
±1mV
|
±0.5°C
|
|
battery:
|
3 x 1.5 volt AAA
|
|
battery life:
|
min 5 years (2500) hours
|
|
sensor type:
|
combination electrode / thermistor
|
|
display:
|
custom LCD
|
|
dimensions:
|
32 x 71 x 141mm³
|
|
weight:
|
220 grams
|
Optional accessories:
pH buffer solutions for pH calibration, different pH values available.
Product safety information
Manufacturer information:
ETI Ltd.
Riverside House, Easting Close
Worthing, West Sussex, , BN14 BHQ
https://www.etiltd.com
There are no reviews yet.
