PPP-30, Peak Power Pack 12.8V/30Ah - 384Wh
This is a lithium-ion battery pack with intrinsically safe LiFePO4 cells and a built-in charger.
It is suitable for high discharge currents of max. 200A (10s) and impresses with its low weight and easy installation.
Nominal voltage: 12.8V
Battery capacity: 30Ah. (not suitable for parallel connection or connection in series)
- Ideal for mobile applications. Effective protection against improper use.
- Ideal for solar power and other applications where excessive discharges can quickly lead to damage of lead-acid batteries.
Output 1 „Mover“: Output with high capacity
- Ideal for maneuvering caravans (caravan maneuvering aids)
- Short-circuit proof
- Protection against excessive battery discharge
- Max. cable diameter: 16mm² (screw terminals)
Output 2 „Domestic“: for low DC loads.
- For lighting, audio and video systems, pumps, cooling devices
- Short-circuit proof
- Protection against excessive battery discharge
- Max. cable diameter: 6mm² (screw terminals)
Input 1 „Car/Solar“: Charging while driving or via a solar module
- Equipped with voltage and current control for safe charging of the lithium-ion battery. Basically any electrical power source can be connected to this input (e.g. a generator or battery charger), as long as 11V< Vin <25V.
The current limiter is automatically set to a safe value.
Input 2 „Adapter“: The adapter supplied with the Peak Power Pack can be connected to this input.
- Battery charging current: 3A, and suitable for 110/230V mains voltage.
Storage mode
- Reduces power consumption almost to zero. Prevents damage by excessive discharge of the battery in storage mode.
Remote control with status indicator
- Push button (supplied) with two-colour LED status indicator.
o Short press of button: High power output is activated for 30 minutes (maneuvering aid applications), red LED.
o Press and hold for 2s: High power output is always activated, red LED flashes slowly.
o Press and hold for 5s: Storage mode; blue LED flashes 10 times.
o Battery is charged via input 1, blue LED flashes slowly.
o Battery is fully charged, blue LED.
o Overload or overheating, red LED flashes.
VE.Direct Port: Can be connected to a PC or smartphone.
("VE.direct to USB" cable or "VE.Direct Bluetooth Smart Dongle" required)
- Operation:
o Output 1: on / 30 min timer / off
o Output 2: on/off
o Input 1: on/off
- Monitoring:
o Battery voltage
o Temperature and alarms
Technical data:
Charging capacity: 30Ah
Stored energy: 384Wh
Nominal voltage: 12.8V
Continuous current at output: 150A (Mover); 30A (Domestic)
Max. output current: 200A (Mover); 50A (Domestic)
Short-circuit current: 300A (Mover); 80A (Domestic)
Weight: 5.4kg
Dimensions: 172 x 190 x 172mm³
Security: NEN-EN-IEC 60335-1, NEN-EN-IEC 60335-2-29, NEN-EN-IEC 62109-1
Emissions/immunity: NEN-EN 55014-1, NEN-EN 55014-2, NEN-IEC 61000-3-2, NEN-IEC 61000-3-3, NEN-EN 50498
