PRO54 RF + AF Shielding Paint

SKU: PRO54ff

Category: Industry Electronics

RF and AF shielding

Shielding attenuation: 25 to 40dB

Pure acrylic

Technically the best paint without graphite

Frost resistant on shipping

from

59,90 €

incl. 19% VAT , plus

Available

This item has variations. Please select the requested variation.

Available

PRO54 RF + AF Shielding Paint

This is technically the best paint that was first-time produced without graphite. One paint for all, if you have high requirements: It shields high frequency electromagnetic radiation as well as low frequency electrical AC fields.
Based on a high quality pure acrylic binder. Frost resistant: Suitable for shipping during winter time and for sea freights in containers. Breathable, solvent-free, low-emission.

Production without graphite has the following advantages:

Does not stain off while overpainting with white wall paint.
Impacts against the white covering paint don't produce black stripes any more.
The surface of the paint film is microporously rough and offers top coatings a catchy undergroung for excellent adhesion.
With 4.8 N/mm² this paint has an extremely high adhesive tensile strength (adhesive power on the underground) for a wall paint, which is 2 times higher than with the graphite paints.

The lack of graphite has only one disadvantage: The electrical resistance and therefore the shielding attenuation is 10dB lower per layer. We always recommend a two-layer application with this paint. Therewith you reach the typical 35-40dB attenuation. The slightly higher costs due to the second coat are compensated by the many advantages.

Technical data:
Shielding attenuation: One-layer: 25dB (7.5m²/l) to 30dB (5m²/l), two-layer 35dB (3.75m²/l) to 40dB (2.5m²/l)
Coverage: One-layer (5-7.5m²/l), two-layer (2.5-3.75m²/l)
Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood etc.
Top coating: Preferablyx covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate). Due to the high adhesive tensile strenght (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral plasters!
Grounding: Must be grounded! For the interior we recommend the grounding strap EB2 plus grounding plate GW (GB) plus GP, for the exterior the fiber additivbe AF3 plus the grounding plate GE.
Ingredients: Water, pure acrylic dispersion, carbon fibers, carbon black, additives, preservative (MIT, BIT).
VOC content: 0.2g/l (the EU limit value for category A/a is 30 g/l from 2010).
SD value: 0.1m
pH value: 8
Adhesive tensile strenght: 4.8N/mm²
Shelf life: 12 months
Colour: black

The shielding paint is available in containers with 1litre or 5 litres (please select when ordering)