PeakTech 4205, Current Clamp Adaptor with Rogowski Coil
This innovative current clamp works in conjunction with an (optional) multimeter and you can use it to carry out current measurements safely and quickly. The flexible design of the jaw opening makes it possible to take measurements on conductors with both small or large diameters. Using the slide switch, it is possible to set the measuring ranges of the current clamp between 30, 300 and 3000 A AC.
The measuring coil can be opened for the measurement to pass it around the conductor, then it is closed again.
The conductor should be in the centre of the coil when measuring.
The readings are read in the 3000mV AC range of the connected multimeter. .
Due to the intuitive design of the device, this current clamp is suitable for all areas in which currents have to be measured, whether in the hobby area or in professional use in industry.
- For conductors with a maximum diameter of 160mm
- Measuring ranges 30/300/3000 A AC switchable
- Flexible measuring coil, closure can be opened on one side
- Measurement in conjunction with an existing multimeter
- 1m connecting cable with 4mm banana plugs
- Touch protection
- Overvoltage category CAT III 1000 V, CAT IV 600V
- Safety: EN 61010-1, EN 61010-2-032, EN 61326-1
- Accessories: Batteries and instruction manual
Technical data:
Measuring ranges: 0.3-30 / 30-300 / 300-3000 A AC
Output voltage: 100 / 10 / 1 mV/A
Accuracy: ±3.0% +5mV / ±3.0% +3mV / ±3.0% +3mV
Frequency range: 50-400Hz, True RMS
Power indicator: Green LED
Battery status indicator: Red LED
Operating temperature: +5°C to +40° @ max. 80% RH
Power supply: 2 x 1.5V AAA batteries
