PeakTech 6227, Switching Power Supply 0-60V/0-6A DC with Colour LCD & 2 x USB
This newly developed laboratory power supply offers a controllable 0-60V or 0-6A DC main output with a maximum continuous power of 150W. For developers, this laboratory power supply offers two switchable USB outputs with their own LCD display with voltage and current values.
If you use a load up to 2.5A, you can set the output voltage up to 60V. If you want to use a higher current up to 6A, set the load to a maximum of 25V. Of course, all stages are also adjustable in between, e.g. 30V/5A, 40V/3.7A or 50V/3A.
The current and voltage setting also can be done when the output is switched off. By pressing the knob for current or voltage, the setting resolution can be fine/coarse switched from 1mA to 100mA or 10mV to 1V.
Due to the high range of functions and the simple operation with the best price-performance ratio, this laboratory power supply is ideal for the education, hobby, development and service sector.
Accessories: Power cable, connection leads and manual
Technical data:
| Output Voltage: |
0 - 60VDC (max. 2,5A) |
| Output Current: |
0 - 6ADC (max. 25V) |
| Output Power: |
150W |
| Display Resolution (V): |
10mV |
| Display Resolution (A): |
1mA |
| Setting Resolution (V): |
10mV/1V, switchable |
| Setting Resolution (A): |
1mA/100mA, switchable |
| Ripple & noise: |
=5mV RMS; =20mA RMS |
| Load regulation: |
=0.05% + 5mV, =0.5% + 5mA |
| Line regulation: |
=0.1% + 3 mV, = 0.2% + 3mA |
| Display accuracy: |
±0.5% + 5 dgt. |
| Protection: |
Overload, overtemperature, short circuit |
| Operating voltage: |
115/240VAC; 50/60Hz |
| Dimensions (WxHxD): |
80 x 160 x 260mm³ |
| Weight: |
1.6 kg |
