Safe and Sound Pro mmWave, Millimeterwellen- Breitband- Messgerät mit ext. Stummelantenne, 20 - 40GHz

SKU: SSPmmWS

Category: Measuring Instruments

GTIN: 4069565000470

Detects and measures among other things: 5G frequencies in the 20-40GHz range
Easy to use
Professional measurement accuracy at an affordable price
High receiver sensitivity
OLED display: 0.5 to 500,000µW/m²

998,00 €

incl. 19% VAT , plus

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

Safe and Sound Pro mmWave, Millimeter Wave Broadband- Meter with ext. Stub Antenna, 20-40GHz

Attention: No sale of this product to private individuals!

With this test receiver, Radar signals and 5G signals in the EHF/millimeter wave range from 20-40GHz can be detected and measured.

It is the perfect complement to the Safe and Sound Pro II- RF Meter (0.2-8GHz) and is the missing link to cover the entire 5G frequency range.

This instrument is professionally highly accurate and affordable - at a fraction of the cost of current high-band detectors.

The digital OLED display shows reading sin microwatts/m² or V/m, including audio, peak and average values with max. peak hold.

With this device you can detect and quantify the RF radiation present in your environment in the frequency range of 20-40GHz.

Some of the most common radiation sources that mmWave can detect are 5G cell towers, high-frequency Radar and other 5G high-band devices.

This sensitive receiver is capable of measuring potentially harmful millimeter wave radiation from any continuous or pulsed digital source. To identify the different sources, the mmWave has a built-in speaker with adjustable volume. Each millimeter wave radiation source has its own unique sound signature.

The sensitive instrument has four "traffic light" LEDs for evaluating the received signal strength according to the building biology standard SBM 2015.

5G Radiation Sources

As the 5G mobile network continues to expand, our exposure to RF radiation is also increasing. It is becoming increasingly common for individuals to experience a range of negative heath effects associated with EMF and RF exposure.

WAs always, detection is the first step in protecting yourself from these potentially negative health effects. There is currently a lot of discussion about the frequency bands use in this network, and with this range of measuring devices we would like to help keep you informed and protected.

The biological damage caused by microwave radiation at the cellular level is well below current government safety standards. These only consider the heating of tissue to be a health risk. This measuring device complies with the latest scientific and building biology standards. However, numerous studies suggest that RF radiation can have an impact on the human body even under current legal regulations.

Attention: In fact it is e.g. currently so that often no signal is displayed. This is not because the devices are defective, but rather because there is currently little to measure in the 5G Frequenzy band FR2 outside of large cities, ports or airports.

Antenna

The mmWave comes with a suitable stub antenna for the frequency range 20-40GHz with a semi-.omnidirectional pattern (50° forward and 50° backwords).

Technical data:

Frequency range: Real time analysis (±6dB) from 25-40GHz.

Full frequency range with limited accuracy: 18-40GHz

Measuring range: 0.5µW/m² to 30.000µW/m²

Sensitivity: 0.5µW

Accuracy: ±5dB

Detection of short pulses: 50µs

Antenna: External stub antenna

Display: OLED, bar display, PEAK, MAX and AVG at the same time

4 LEDs in traffic light colours to evaluate the readings