TE-4502, Tinytag Plus LAN, Ethernet- Temperature/Humidity Logger with two ext. Probes
This data logger monitors temperatures from -25°C to +85°C, and 0 to 100% RH using the accompanying temperature/RH probes. The coated RH sensor offers good resistance to moisture and condensation. It plugs directly into a network point and sends data via the LAN for immediate viewing in the Tinytag Explorer Connect software.
The logger records data at user-defined logging intervals and can be programmed to give alarm alerts, both audible and visual, in the event of a problem.
The logger also has an alarm output that changes state when alarms are active.
The logger is supplied with a PoE injector, an RJ45 shroud and a detailed manual.
LAN loggers can be mixed and matched with Tinytag Plus Radio and Ultra Radio data loggers within an application to meet particular site layout and infrastructure requirements.
Two
PBRF-8001 temperature and relative humidity probes and two
CAB-0034 sensor extension cables are provided with the logger.
The logger comes without 2 LAN cables for connection to the PoE injector. These need to be ordered separately.
Technical data:
Temperature:Reading range: -25°C to +85°C
Sensor type: thermistor (external probes)
Response time: 10 mins to 90% of the reading change (in moving air)
Logger resolution: 0.01°C or better
Logger accuracy: ca. 0.5°C (0 to +50°C)
Relative humidity:Reading range: 0 to 100% RH
Accuracy: ±3.0% RH
Reading resolution: 0.04% RH
Response time: 16 seconds to 90% of the reading change
Stability: Better than 1% per year (typical)
Logging intervals: 2 minutes to 10 days
Default logging interval: 10 minutes
Logging/off-line capacity: 361 days typical at a 10 minute logging interval
Alarms: 2 fully programmable, latching alarms
Alarm delay: 1 second to 10 days
Alarm indicators: visual (LED) & audible (sounder)
Alarm output: 3-pin, powered output that changes state when alarms are active
IP rating: IP67 (waterproof with waterproof shroud on the Ethernet connection fitted)
Operational range: -20°C to +55°C
Case dimensions (H x W x D): 161 x 113 x 62mm³
Weight: 402g
Probes:IP rating: IP20
Operational range: -25°C to +85°C
Dimensions: 78mm x Ø16mm
Cable length: 1.5m
Weight: 76g
Optional accessories:
When used as a standalone device, a copy of the following software is required:
SWCD-0040 Tinytag Explorer
When used as a part of a Tinytag Connect system, a copy of the following software is required:
SWCD-0080 Tinytag Explorer Connect
CAB-0041 Alarm output cable for connection to an external alarm device
