TESTEC TT-CC 770, Current Clamp Adapter, 7 or 70A AC/DC

Testec

TESTEC TT-CC 770, Current Clamp Adapter, 7 or 70A AC/DC

SKU: TT-CC 770

Category: Measuring Instruments

Connection to oscilloscope or multimeter
Measuring ranges: 7Apeak and 70Apeak AC/DC
Output signal: 500mV/A and 50mV/A
Bandwidth: DC to 1MHz
Clamp opening: 10.3mm

1.037,09 €

incl. 19% VAT , plus

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

TESTEC TT-CC 770, Current Clamp Adapter, 7 or 70A AC/DC

The AC/DC current clamp adapter TT-CC 770, in conjunction with an oscilloscope, enables the display of alternating current and direct current, alternating and direct current measurements up to 70A peak current and frequencies up to 1MHz. The measured currents are converted into proportional voltage signals.

The adapter has a BNC output and can be connected to an oscilloscope using the supplied BNC connection cable. Power is supplied via a 9V alkaline battery or a plug-in power supply (also included).

With the supplied banana plug adapter, the current clamp adapter works with almost all modern digital multimeters (DMMs).

Technical data:

Measuring ranges:	7A, 70A
Output signal:	100mV/A - 10mV/A500mV/A, 50mV/A
DC measurement inaccuracy:	±3% ±20mA @ 500mV/A ±4% ±200mA @ 50mV/A max. ±15% @ 50mV/A
Bandwidth:	DC - 1MHz
Rise and fall time:	0.35µs
Max. operation voltage:	600VACeff CAT II 300VACeff CAT III
Battery type:	9V alkaline battery (NEDA 1604, IEC 6LR61)
Battery lifetime:	6h
Operation temperature:	0 to +50°C
Storage temperature:	-20 to +80°C
Max. operation humidity:	0 to +40°C, 95% r.F. +40 to +50°C, 45% r.F.
Pollution degree:	2
Clamp opening:	10.3mm
Dimensions (L x W x H):	262mm x 80mm x 36mm
Weight:	310g
Supplied accessories:	Hard case TT-CC HC Shrouded BNC measuring lead TT-CC B100 Shrouded measuring adaptor BNC/4mm banana TT-CC MA Mains power adaptor TT-CC NT