TESTEC TT-CC 990, Current Clamp Adapter, 4 or 40A AC/DC

SKU: TT-CC 990

Category: Electricity

Connection to oscilloscope or multimeter
Measuring ranges: 4Apeak and 40Apeak AC/DC
Output signal: 1000mV/A and 100mV/A
Bandwidth: DC to 1.5MHz
Clamp opening: 10.3mm

1.237,01 €

incl. 19% VAT , plus

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

TESTEC TT-CC 990, Current Clamp Adapter, 4 or 40A AC/DC

The AC/DC current clamp adapter TT-CC 990, in conjunction with an oscilloscope, enables the display of alternating current and direct current, alternating and direct current measurements up to 40A peak current and frequencies up to 1.5MHz. The measured currents are converted into proportional voltage signals.

The adapter has a BNC output and can be connected to an oscilloscope using the supplied BNC connection cable. Power is supplied via a 9V alkaline battery or a plug-in power supply (also included).

With the supplied banana plug adapter, the current clamp adapter works with almost all modern digital multimeters (DMMs).

Technical data:

Measuring ranges:	4A, 40A
Output signal:	100mV/A - 10mV/A1000mV/A, 100mV/A
DC measurement inaccuracy:	±3% ±10mA @ 1000mV/A ±4% ±100mA @ 100mV/A
Bandwidth:	DC - 1.5MHz
Rise and fall time:	0.23µs
Max. operation voltage:	600VACeff CAT II 300VACeff CAT III
Battery type:	9V alkaline battery (NEDA 1604, IEC 6LR61)
Battery lifetime:	4h
Operation temperature:	0 to +50°C
Storage temperature:	-20 to +80°C
Max. operation humidity:	0 to +40°C, 95% r.F. +40 to +50°C, 45% r.F.
Pollution degree:	2
Clamp opening:	10.3mm
Dimensions (L x W x H):	262mm x 80mm x 36mm
Weight:	310g
Supplied accessories:	Hard case TT-CC HC Shrouded BNC measuring lead TT-CC B100 Shrouded measuring adaptor BNC/4mm banana TT-CC MA Mains power adaptor TT-CC NT