TV-4703, Tinytag View 2, Voltage Datalogger with LCD Display, 0-2.5VDC
This datalogger can record DC voltages from 0-2.5V with a resolution of 0.1mV. An input voltage cable is included for connection to various third-party sensors, meters and voltage sources with output voltages up to 2.5VDC.
In case that a sensor is already equipped with a connected cable, suitable optional plugs are available for connection to the datalogger.
The datalogger stores the measured values in volt units. If the user requires other physical units e.g. mbar, ppm, nT, W etc, which correspond to the sensors used, this is possible as an option upon surcharge when ordering the datalogger. (Because of this "scaling" please contact PSE before ordering.)
Popular Applications:
- Third-party Sensors with voltage outputs
- Pressure
- Flow rate
- Rainfall
- Battery charging/discharging
Characteristics
- Battery powered voltage recorder with on-site display
- 32,000 reading capacity
- High accuracy and reading resolution
- Robust IP65 case
- Low battery monitor
- User-replaceable battery
- User-settable alarms
- Optional audible alarm
Technical data:Measuring range: 0-2.5VDC
Resolution: 0.1mV
Display resolution: 0.1V
Display refresh rate: every 2 seconds
Accuracy: 0.2% of reading ±10mV
Input impedance: 150kOhm
Memory: 32,000 readings, non volatile
Trigger start: magnetic switch
Delayed start: relative / absolute (up to 45 days)
Stop Options:
when full after n Readings never (overwrite oldest data)
Reading types: Actual, Min, Max
Logging interval: 1 sec to 10 days
Offload: While stopped or when logging in minutes mode
Alarms: 2 fully programmable; latchable
Housing protection: IP68 (waterproof, only with the screw cap on the interface socket)
Operation temperature range: -30°C to +70°C
Housing sizes: Ø60mm; 85 x 77 x 35mm³ (h x w x d)
Weight: 85g
Optional accessories (please order extra):SWPK-7 USB-INT Starter pack: TINYTAG EXPLORER Software and
USB port cable with quick start guide in English, French, Italian, Spanish
and Swedish.
ACS-6000 Trigger start magnet (only necessary, if you intend to use this kind of starting the logger runs)
ACS-5001 external audible alarm box
