ThermaData WiFi Pharm Data Logger with Fridge Content Simulaton Probes
A new addition to our ThermaData WiFi range of data loggers, the ThermaData WiFi with Pharm probe(s) are a battery powered, cost-effective, temperature monitoring system that remotely records storage and transportation temperatures of perishable items such as food, vaccines and medication.
Each unit has an intuitive LCD displaying; temperature, WiFi connection status, max/min recorded temperatures, alarm status and battery life. Simple to set up, the logger once up and running will transmit recorded data to a WiFi router connected to the internet which can then be accessed and viewed from a PC, laptop or tablet anywhere in the world.
At programmable intervals, the loggers will record temperature from both sensors, recording up to a maximum of 18,000 readings (9,000 from each sensor). Each logger incorporates a red and green LED. The flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that the customised preset alarms have been exceeded. Each logger communicates directly to the WiFi router at set intervals to push data through the internet into ThermaData Studio. The information is available to be analysed and exported into a report format. Each unit is supplied with a USB lead, wall bracket and FREE ThermaData Studio software (licence free) available to download from the ETI website.
Each external thermistor probe is encased in a sealed bottle and incorporates a one metre PUR/PVC fixed lead. To begin monitoring, simply unscrew and top up with Glycol solution (50ml bottle supplied).
Please note: Model TD1F (# 298-022-PHM) is supplied with one external pharm probe and an internal sensor.
Model TD2F (# 298-111-PHM) is supplied with two external pharm probes.
Simple setup and easy to use software makes the ThermaData WiFi loggers perfect for HACCP analysis.Attention: WiFi routers have a range of 100 metres depending on the make, model, capabilities and setup of the router. Environmental conditions may also affect the signal strength.
The loggers are supplied inclusive of thermistor probes, Glycol solution, wall bracket, USB lead and a free traceable certificate of calibration.
Technical data:range - internal: 0 to +50°C (only model TD1F)
range - external: -40 to +70°C
resolution: 0.1 °C/°F
accuracy: ±0.5°C
memory: 2 x 9,000 readings
sample rate: 0.1 to 330 minutes
battery: 2 x 1.5 volt AA
battery lifetime: approx. 12 months
display: 12mm LCD/2LEDs
dimensions: 29 x 72.5 x 96mm³
weight: 165 grams
Optional accessories:830-880 protective silicone boot - black
816-035 replacement Glycol solution - 50ml
