The Automotive Diagnostics Kit ADK605004DW contains a selection of TiePie automotive products neatly packed in a protective carry case.
The main component of the Automotive Diagnostics Kit ADK605004DW is the Automotive Test Scope ATS605004DW-XMS. The differential Automotive Test Scope ATS605004DW-XMS can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS605004DW-XMS the possibility to perform fully wireless differential measurements.
Place the Automotive Test Scope ATS605004DW-XMS near to the engine bay and connect its inputs to the points you want to measure. Your computer can remain at a safe distance, connected via WiFi to the automotive WiFiScope, that operates as access point. No hassle of USB cables between the scope and the computer that limit your flexibility.
The high sampling rate and large memory of the Automotive Test Scope ATS605004DW-XMS are very useful for capturing and analyzing longer fast signals such as CAN bus communications.
Several other products are included for diagnosing and solving common and less common automotive problems such as sensor malfunctions, actuator malfunctions, ignition problems, timing problems, power deficiency, etc. Refer to the automotive articles for examples of solved automotive problems.
The contents of this versatile Automotive Diagnostics Kit ADK605004DW are:
- 1x Automotive Test Scope ATS610004DW-XMSG - 50 MSa/s four channel automotive WiFi oscilloscope with differential / single ended switchable inputs with Safe Ground protection, SureConnect, resistance measuring, 250 MHz bandwidth, 14 bit resolution and 256 Mpts memory
- 4x Measure Lead TP-C1812B - 3m long, BNC to banana, low noise differential measure lead
- 1x Back Probe TP-BP85 - Set of 8: Green, Blue, Yellow, Red, 4x Black - 8 thin and flexible back probes, 1000 V CAT III with 4 mm banana socket
- 2x Ignition Pickup TP-IP250 - Capacitive secondary ignition pickup to be clamped on a spark plug wire
- 1x Current Clamp TP- CC80 - 80 A current clamp with 2% accuracy and 4 mm shrouded banana sockets
- 1x Current Clamp TP-CC600 - 600 A current clamp with 3% accuracy and 4 mm banana sockets
- 1x Accelerometer TP-ACC20 - 09 - Accelerometer with 2 axes, ±2 g range with 420 mV/g sensitivity
- 4x Differential Attenuator TP-DA10 - Differential 1:10 attenuator, rated 300 V with 25 MHz bandwidth
- 1x Alligator Clip TP-AC50B - 5 alligator clips with 10 mm clamping range and 4 mm banana socket, rated for up to 60V
- 1x Handyscope / WiFiScope Power Supply - To power the scope and charge its battery
- 1x Ground Compensation Cable TP-GCC150 - To avoid measurement errors when measuring differentially, the external power supply is used and the device under test is not grounded
- 1x Probe Compensation Cable TP-DB9-BNC-30 - To calibrate standard oscilloscope probes using the built in calibration signal
- 1x USB 3.0 Cable 1,5m length
- 1x Network Cable, 3 m length
- 1x Carry Case BB454 - Carry case for all above mentioned items
Options:
Kit Lite: same contents as Basic + ATIS Lite - Automotive Test and Information System Lite is a comprehensive knowledge base with generic information to help the automotive technician diagnose car problems.
Kit Pro: same contents as Basic + ATIS Pro - Automotive Test and Information System Pro is a comprehensive knowledge base with generic and brand specific information to help the automotive technician diagnose car problems.
