Weller Soldering Tip Series CT, CT5 C8/1.6 x 0.8mm, Straight, 425°C

SKU: WE804432

Category: Operating Equipment

GTIN: 4003019432011
HAN: 4CT5C8-1

suitable for Weller Magnastat soldering iron FE50M and all TCP soldering irons
the rapid heat recovery increases the soldering speed
three temperature ranges can be selected (last digit of article number): *-6 = 310 °C / *-7 = 370 °C / *-8 = 425 °C

8,45 €

incl. 19% VAT , plus

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Weller Soldering Tip Series CT, CT5 C8/1.6 x 0.8mm, Straight, 425°C

The Magnastat system works using a permanent magnet and a ferromagnetic temperature sensor. If the soldering tip is cold, the permanent magnet is attracted to the ferromagnetic temperature sensor. In this state, the switch is closed and the heating is switched on. If the temperature sensor approaches its Curie low point,
i.e. the selected tip temperature, its magnetic behavior changes and the heating is switched off. If the tip cools down a little, the temperature sensor is attracted again and the control cycle begins again.

The working temperature is selected by simply changing the soldering tip with the temperature sensor attached to it.

The Weller Longlife soldering tips cover the temperature ranges 260°, 310°C, 370°C, 425°C and 480°C.

The WTCP 51 is not suitable for EGB-safe applications because the soldering iron is not antistatic.

Characteristics:

suitable for Weller Magnastat soldering iron FE50M and all TCP soldering irons
the rapid heat recovery increases the soldering speed
three temperature ranges can be selected (last digit of article number): *-6 = 310 °C / *-7 = 370 °C / *-8 = 425 °C