Built-In Instruments
Items 11 - 20 of 22
- Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
- Current and voltage harmonics analysis up to 51st (measurements available via RS-485).
- Two-line LCD display with high contrast and built-in backlighting
- Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
- Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V)
- High sampling frequency of measured signals
- Programming parameters via buttons or RS-485 interface and free e-con software
- 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
- Possibility to program each of the alarms to react to a different measurements
- Pulse output to control energy consumption
- Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
- Memory of minimal and maximal values for all measured quantities
- Mounting dimensions: 96 x 48 x 93mm
- Measurement of voltage, a.c. current or frequency
- Three-colour LED display (5 digits, 14 mm high)
- Digital output RS-485 - Modbus RTU protocol.
- Two alarm outputs of OC type.
- Programmable parameters through RS-485 interface using the free eCon software
- Measurement: current and DC voltage up to 5A and 600V
- Three-colour display (14mm high), programmed in three intervals of the measured value
- Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
- Four alarm outputs with signalling by LED diodes, operating in 6 different modes
- Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
- Storage of minimal and maximal values for all measured quantities
- 21-point individual characteristic for the measured value
Items 11 - 20 of 22