LUMEL

SKU:
LLM3ff
Variations in:
  • Variant
  • Indication of the presence of the three phase voltages towards neutral wire
  • Display voltage range: 3 x 230 ... 400VAC
  • DIN rail mounting for the installation in the control cabinet
  • External optional indication for the control cabinet door
  • 3 years warranty
  • SKU:
    LP10 Vff
    Variations in:
    • Phases/Relay Outputs
    • Compact size 17.5mm
    • True RMS measurement
    • Under voltage protection
    • Over voltage protection
    • Phase unbalance protection
    • Phase failure protection
    • Phase incorrect sequence protection
    • Neutral failure protection
    • 'Adjustable nominal voltage, trip point, trip time delay
    • On site selection of VLL/VLN value based tripping
    • Self powered
    • Product variants for 1 or 3 phases and with 1 or 2 relay outputs
    • LED indication for faults
    • Disabling of over & under voltage fault on site is possible
    63,31 € - 74,97 € *
    • Available
    SKU:
    N20ZPLUSff
    Variations in:
    • Input Type / Supply Voltage
    • Measurement of voltage, a.c. current or frequency
    • Three-colour LED display (5 digits, 14 mm high)
    • Digital output RS-485 - Modbus RTU protocol.
    • Two alarm outputs of OC type.
    • Programmable parameters through RS-485 interface using the free eCon software
    SKU:
    N21 00M0
    • Panel mounting
    • Universal input (measurement of temperature and standard signals)
    • New range for DC voltage measurements: ±75mV
    • Relay alarm output
    • Universal power supply from 24 to 230VAC/DC
    • Supply output for external transducers: 24VDC
    • OLED graphic display, horizontally or vertically configurable
    • Configuration of the meter via mini USB interface via the free eCon software
    141,88 € *
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    SKU:
    N30Hff
    Variations in:
    • Supply Voltage / Output Option
    • Measurement: current and DC voltage up to 5A and 600V
    • Three-colour display (14mm high), programmed in three intervals of the measured value
    • Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
    • Four alarm outputs with signalling by LED diodes, operating in 6 different modes
    • Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
    • Storage of minimal and maximal values for all measured quantities
    • 21-point individual characteristic for the measured value
    SKU:
    N32Hff
    Variations in:
    • Supply Voltage/Additional Outputs
    • Voltage measurement ±600V (maximum range display ±1200V), current measurement via shunt, power, energy and capacity measurement of DC circuits
    • two-line LCD display with high contrast and built-in backlighting
    • possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
    • Wide range of voltage measurement at the shunt input up to 1500 mV
    • high sampling frequency of measured signals
    • programming parameters via buttons or RS-485 interface and free e-con software
    • 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
    • pulse output to control energy consumption
    • conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
    • memory of minimal and maximal values for all measured quantities
    • automatic voltage measurement compensation function
    • Mounting dimensions: 96 x 48 x 93mm
    SKU:
    N32Pff
    Variations in:
    • Supply Voltage/Additional Outputs
    • Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
    • Current and voltage harmonics analysis up to 51st (measurements available via RS-485). 
    • Two-line LCD display with high contrast and built-in backlighting
    • Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
    • Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V) 
    • High sampling frequency of measured signals
    • Programming parameters via buttons or RS-485 interface and free e-con software
    • 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
    • Possibility to program each of the alarms to react to a different measurements 
    • Pulse output to control energy consumption
    • Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
    • Memory of minimal and maximal values for all measured quantities
    • Mounting dimensions: 96 x 48 x 93mm
    SKU:
    N32Uff
    Variations in:
    • Supply Voltage/Additional Outputs
    • Multi-purpose input for measuring: temperature, resistance, standard signals
    • Two-line LCD display with high contrast and built-in backlighting
    • Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
    • Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
    • 4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
    • Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
    • Storage of minimal and maximal values for all measured quantities
    • Supply of object transducers
    • 32-point individual characteristic for the measured value
    • Mathematical functions for converting the measured value
    • Mounting dimensions: 96 x 48 x 93mm
    SKU:
    N43ff
    Variations in:
    • Input Voltage/Supply Voltage
  • RMS measurement of AC voltage and current, active, reactive and apparent power, active and reactive energy, power factor, frequency, THD
  • The displays consider the values of programmed transformation ratio of upstream measuring transformers
  • 3 programmable alarm outputs and 1 pulse output
  • Digital data transfer to master devices via RS-485 (MODBUS).
  • Pulse output to control the 3-phase active energy
  • 3 years warranty 

     

  • SKU:
    ND10ff
    Variations in:
    • Input Current
  • Measurements of up to 52 mains network parameters
  • Power supply via the measuring circuit
  • The displays take into account the values of programmed transformation ratios for upstream instrument transducers
  • Modbus RS-485 communication interface
  • Free eCon software
  • Two alarm outputs
  • Pulse output
  • Backlit 3.5" LCD display
  • 3 years warranty