TP-C812B, 2m Measuring Lead for TiePie Differential Oscilloscopes

TP-C812B, 2m Measuring Lead for TiePie Differential Oscilloscopes

SKU: TP-C812B
GTIN: 7423620446493
Category: Oscilloscope Accessories
Manufacturers: TiePie

Accessory and spare part for TiePie scopes
Differential measuring lead
2m lead length
Isolated BNC plug
very flexible, heat resistant silicone isolation
high common mode rejection

35,11 €

incl. 19% VAT , plus

: 6 - 8 Workdays (DE - int. shipments may differ)

pcs

Description
Reviews

TP-C812B, 2m Measuring Lead for TiePie Differential Oscilloscopes

The Measure lead TP-C812B is a low noise differential measure lead designed to be used with the following TiePie instruments:

WiFiScope WS6 DIFF
WiFiScope WS4 DIFF
Handyscope HS6 DIFF
Handyscope HS4 DIFF

This 2m long measure lead splits in two individual ends of each 1.2m long. The BNC connector at one end plugs directly on the oscilloscope. The two other ends each feature a single 4mm banana plug, on which application specific test points, clamps or probes can be plugged.

The Measure lead TP-C812B is very flexible, uses a heat resistant silicone isolation and shrouded banana plugs.

The inputs of the WiFiScope WS6 DIFF, WiFiScope WS4 DIFF, Handyscope HS6 DIFF and Handyscope HS4 DIFF are differential, which means that both sides of the inputs have a high impedance. There is no connection to ground as in conventional oscilloscopes which are used with coax cables. Using a coax cable on these oscilloscopes would result in the oscilloscopes picking up a lot of external interference.

High CMRR

The specially designed Measure lead TP-C812B has a high Common Mode Rejection Ratio (CMRR), it is very insensitive to external interfering signals. The two ends can be placed up to more than two meters apart, while picking up very little interference. With a conventional oscilloscope with a standard oscilloscope probe this is not possible. The maximum distance between the positive side and ground is then usually limited to approximately 20cm. And this 20cm is very susceptible to interference. The Measure lead TP-C812B for the WiFiScope WS6 DIFF, WiFiScope WS4 DIFF, Handyscope HS6 DIFF and Handyscope HS4 DIFF does not have this disadvantage. External interference is very well suppressed by the special construction of the Measure lead TP-C812B. Measuring between two distant points is now possible.

Technical data:

Connectors:
Instrument side:	isolated BNC plug
Test point side:	red and black 4mm shrouded banana plugs
Bandwidth:	7MHz
Safety:	CAT III, 1000V, double isolated
Dimensions:
Total length:	2000mm
Length to split:	800mm
Length individual ends:	1200mm
Weight:	80g
Colour:	black
Certifications and compliances:
CE conformity:	yes
RoHS:	yes
Accessories
Colour coding rings:	5 x 3 rings, various colors