Electrical test instruments for installation & service

Digital- Multimeter

Voltage Meter

Current Meter

Line Locating Devices

Cable Testers

Measurement Accessory

Best sellers

PSE Priggen

BNC measuring lead, 1.2m MI030

SKU:: MI030

BNC measuring lead, 1.2m

PSE Priggen

BNC measuring lead, 1.2m MI030

16,66 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

In stock

Pico Technology

Current Clamp Probe 600A AC/DC with BNC Connector

SKU:: TA019

Low–battery indicator
Zero offset button
BNC type connectors
Screened lead for noise suppression

Pico Technology

Current Clamp Probe 600A AC/DC with BNC Connector

168,98 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

In stock

PSE Priggen

Large Dolphin (Gator) Clip

SKU:

TA005ff

Variations in:

Colour

Large dolphin (gator) clip

PSE Priggen

Large Dolphin (Gator) Clip

11,90 € *

Go to item

Available

Pico Technology

MI053 Differential Oscilloscope Probe, 700V, 25MHz, x10/x100, CAT III

SKU:: TA041

Differential oscilloscope probe

700V

25MHz

x10/x100

CAT III

Pico Technology

MI053 Differential Oscilloscope Probe, 700V, 25MHz, x10/x100, CAT III

486,71 € *

Go to item

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

In stock

Pico Technology

Multimeter Probe with 4mm Banana Socket

SKU:

TA001ff

Variations in:

Colour

Multimeter probe

Pico Technology

Multimeter Probe with 4mm Banana Socket

7,14 € *

Go to item

Available

PeakTech

Peak Tech 1615, Clamp Meter, 40/400/1000A AC/DC

SKU:: P1615

3 ¾ digit, 17 mm LCD; max. indication: 3999

Duty cycle

Auto/manual range selection

Data hold

Backlight

AC/DC current: 1000 A

AC/DC voltage: 600 V

Resistance, frequency, capacitance and temperature measurement

Diode test and continuity test

Auto power off

Max. conductor size: 31 mm

PeakTech

Peak Tech 1615, Clamp Meter, 40/400/1000A AC/DC

106,98 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 1625, Clamp Meter,40/400/1000A AC/DC

SKU:: P1625

3 ¾ digit, 15 mm LCD; max. indication: 3999, 42-segment analogue bargraph

True rms

Auto ranging

Min./Max. mode

data hold

backlight

AC/DC current: 1000 A

AC/DC voltage: 600 V

Resistance, frequency, capacitance and temperature measurement

Diode test and continuity test

Auto power off

max. conductor size: 31 mm

PeakTech

Peak Tech 1625, Clamp Meter,40/400/1000A AC/DC

154,58 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 1635, Clamp Meter, Current Leakage Tester, 2/80A AC/DC

SKU:: P1635

3 2/3 digit, 11 mm LCD; max. indication: 2400

AC/DC current leakage tester

Data hold

Backlight

Non-contact voltage detector and flashlight

AC/DC current: 2/80 A

Auto power off

Max. conductor size: 18 mm

PeakTech

Peak Tech 1635, Clamp Meter, Current Leakage Tester, 2/80A AC/DC

126,02 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 1640, Digital Power Clamp Meter with True RMS, 1000A AC/DC

SKU:: P1640

3 ¾ digit, 17 mm LCD; max. indication: 3999

True RMS

auto/manual range selection

data hold

backlight

AC/DC power: 240 kW

AC/DC current: 1000 A

AC/DC voltage: 600 V

Resistance- and frequency measurement

Diode test and continuity test

Auto power off

max. conductor size: 31 mm

PeakTech

Peak Tech 1640, Digital Power Clamp Meter with True RMS, 1000A AC/DC

126,02 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 1655, Digital Clamp Meter, 4 3/4-digit, 1500A AC/DC

SKU:: P1655

4 3/4-digit LCD-display (max. 40000) with backlight and 42-segment bargraph

True RMS

MIN/MAX, DATA-Hold

zero adjustment with ZERO-function

relative measurement

diode - and continuity test

auto power off and low battery indication

current measurements up to 1500 A AC/DC

conductor size: 55 mm

non contact voltage detector

PeakTech

Peak Tech 1655, Digital Clamp Meter, 4 3/4-digit, 1500A AC/DC

154,58 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Best sellers

PeakTech

Peak Tech 1660, Digital Power Clamp Meter, 4-digit, 750kW, with USB

SKU:: P1660

4-digit LCD-display (max 9999) with backlight and 42-segment bargraph

USB Interface / MIN/MAX and DATA-Hold

Auto power off and low battery indication

Current measurement up to 1000 A AC

conductor size: 55 mm

Con contact voltage detector

Analysis for single phase and balanced 3 phase systems

True RMS

True, apparent- and reactive power and power factor measurement

Data-memory for 99 values

PeakTech

Peak Tech 1660, Digital Power Clamp Meter, 4-digit, 750kW, with USB

202,18 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2510, Power analyzer with RS-232 C interface

SKU:: P2510

0,1 Watt resolution for high precision

Current mode from direct input, inductive clamp probe or CT

Auto range

Built-in peak hold & data hold function

Alarm Hi, low setting capability

Power supply by DC battery or AC to DC adapter

PeakTech

Peak Tech 2510, Power analyzer with RS-232 C interface

440,18 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2525, 3 Phase Motor Rotation Indicator

SKU:: P2525

Robust alligator clips for problem-free connection

Wide range of 3-phase power source from 120 ... 400 V AC resp. for rotary direction from 1 ... 400 V AC

Determine the motor connection

PeakTech

Peak Tech 2525, 3 Phase Motor Rotation Indicator

59,38 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2530, 3 Phase Rotation Tester

SKU:: P2530

Robust alligator clips for problemfree connection

Wide range of 3-phase power source from 40 ... 690 V DC

No battery required

PeakTech

Peak Tech 2530, 3 Phase Rotation Tester

59,38 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2680A, Insulation Tester, Max. 5,000V/300GOhm

SKU:: P2680A

measurements according to VDE 0413

guard circuitry against measurement errors due to surface leakage currents

battery saving circuit/overvoltage protection/current limiting circuit / auto discharge detector /display/auto-off /auto-stop timer

PeakTech

Peak Tech 2680A, Insulation Tester, Max. 5,000V/300GOhm

749,58 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2685A, Insulation Tester, Max. 10.000 V/600 GOhm

SKU:: P2685A

measurements according to VDE 0413

guard circuitry against measurement errors due to surface leakage currents

battery saving circuit/overvoltage protection/current limiting circuit / auto discharge detector /display/auto-off /auto-stop timer

PeakTech

Peak Tech 2685A, Insulation Tester, Max. 10.000 V/600 GOhm

904,28 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2695, Digital Insulation Tester 3 ½-digit

SKU:: P2695

Large dual LC-display with analogue bargraph and backlight

MIN/MAX recording and DATA-Hold

Auto-discharge of capacitive voltage for added user protection

Live circuit detection prevents insulation test if voltage >30 V is detected

Low battery indication

Auto power off

PeakTech

Peak Tech 2695, Digital Insulation Tester 3 ½-digit

208,13 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2700, Digital Earth Resistance Tester3 1/2-digit

SKU:: P2700

Dual 3 1/2 digit LCD display (max.2000) with backlight

Automatic zero adjustment

Auto power off

Low battery and overrange indication; data hold

PeakTech

Peak Tech 2700, Digital Earth Resistance Tester3 1/2-digit

178,38 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2705, Digital Milliohmmeter, 3 3/4-digit, 400 mOhm/4/40/Ohm

SKU:: P2705

3 ¾ digit LCD-display (max 4000) with backlight and 42-segment bargraph

Low battery indication

MIN/MAX, DATA-hold

Relative function, auto power off

Diode- and continuity test

Low resistance measurement with 4 wire kelvin test leads

PeakTech

Peak Tech 2705, Digital Milliohmmeter, 3 3/4-digit, 400 mOhm/4/40/Ohm

154,58 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 2715, Digital Loop/PSC Tester

SKU:: P2715

3 1/2-digit LCD display with backlight

For measuring the loop impedance

For measuring the anticipated short-circuit current

Check mains and proper wiring before measurement

Safety: EN-61010-1; CAT III 600 V, double insulated housing

PeakTech

Peak Tech 2715, Digital Loop/PSC Tester

202,18 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Best sellers

PeakTech

Peak Tech 3360, Professional Digital Multimeter, 4 3/4-dgt., IP67

SKU:: P3360

4 3/4 digit, 20 mm LCD display with backlight and 42 segment bargraph display, max. display 40,000

IP67 dust- and waterproof

True RMS measurement

Relative zero

Continuity- and diode test

Data Hold, MIN/MAX Hold

Auto or manual range selection

Auto power off

PeakTech

Peak Tech 3360, Professional Digital Multimeter, 4 3/4-dgt., IP67

118,88 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 3365, 2 in 1 LAN-Tester with Digital-Multimeter

SKU:: P3365

Can test the correct pin configuration of 10 Base-T, 10 Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables 356 A, TIA- 568A/568B and Token Ring cable etc.

With remote kit it can remotely test cables up to 300 m away either on wall plate or patch panel.

Can test the ground wire

Measures DC/AC voltage, DC/AC current, Resistance

Continuitytest with buzzer and diode test

PeakTech

Peak Tech 3365, 2 in 1 LAN-Tester with Digital-Multimeter

66,52 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 3415 USB, Digital-Multimeter 3 5/6-digit with USB Port

SKU:: P3415

Overload-protection on all ranges

relative measurement, duty cycle

MIN/MAX-mode, Data-hold

auto power off

Auto- and manual range selection

low battery indication

PeakTech

Peak Tech 3415 USB, Digital-Multimeter 3 5/6-digit with USB Port

89,13 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 3435, Cable Detector Kit

SKU:: P3435

Tracking of conductors in walls, ceilings and floors

Finds discontinuity and short-circuits

Assignment of switches and fuses

Tracking of metallic pipe systems

Tracking of lightning protection and grounding systems

For non- energized and live wire systems

Non contact voltage finder with bargraph

High tracing depth up to 2 meters

Up to seven transmitters per receiver are possible

PeakTech

Peak Tech 3435, Cable Detector Kit

237,88 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 3690, 5 in 1 Multitester

SKU:: P3690

3 4/5-digit display, max 4000 counts

sound level function

measurement of illuminance

humidity and temperature measurement

digital multimeter

overload protection in all areas

data hold automatic and manual range selection

relative value measurement function

auto power off and low battery indication

PeakTech

Peak Tech 3690, 5 in 1 Multitester

95,08 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 3730, Inductance /Capacitance Tester

SKU:: P3730

Meter for capacity, inductivity and resistance

hFE transistor test

diode and continuity test

PeakTech

Peak Tech 3730, Inductance /Capacitance Tester

65,33 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

Peak Tech 4395, 2 in 1 DMM/Insulation Tester

SKU:: P4395

Auto- and manual range selection

Data-Hold, auto power off, Rel.- and max-, min recording function

Three insulation test voltage: 250 V, 500 V, 1000 V, timing function in insulation test, insulation test automatically stops 30 secs. later of

Lock and unlock the insulation test manual

PeakTech

Peak Tech 4395, 2 in 1 DMM/Insulation Tester

308,81 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 1090, Double-Pole AC/DC Voltage Tester with LCD

SKU:: P1090

Measuring range: 6 -690V AC/DC
Backlight bar graph LCD display
Integrated continuity test
Residual current circuit breaker test (FI / RCD
Acoustic signal
TÜV/GS tested

PeakTech

PeakTech 1090, Double-Pole AC/DC Voltage Tester with LCD

78,42 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 1665, Digital Clamp Meter, 1000A AC/DC with True RMS

SKU:: P1665

3 5/6 - digit LCD-display (max. 6000)

True RMS measurement

LED flashlight for measured field lighting

Non Contact Voltage Detector

DATA-hold

Relative measurement

Diodes and continuity test

PeakTech

PeakTech 1665, Digital Clamp Meter, 1000A AC/DC with True RMS

166,48 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 1670, Digital Clamp Meter, 1000A AC/DC with True RMS and Bluetooth

SKU:: P1670

Bluetooth interface for recording data on a PC

4 4/5-digit LCD-display (max. 50000)

True RMS measurement

Simultaneous temperature measurement of two sources of heat by using two Type-K temperature probes

LED flashlight for measured field lighting

Non Contact Voltage Detector

PeakTech

PeakTech 1670, Digital Clamp Meter, 1000A AC/DC with True RMS and Bluetooth

190,28 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

In stock

PeakTech

PeakTech 2005A, Digital Multimeter, 3 1/2 Digits

SKU:: P2005A

28mm, 3 1/2-digit LCD display (max. 1999) with backlight
Manual range selection
hFE transistor test
Capacity measurement up to 200µF
Inductivity measurement up to 20 H
Peak hold
Temperature measurement using type-K probe
Fast continuity test and diode test
Auto power off and low battery indication
Security: EN 61010-1; CAT III 1000V

PeakTech

PeakTech 2005A, Digital Multimeter, 3 1/2 Digits

47,48 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 2170, LCR-/ESR Meter, 100Hz - 100kHz, with USB Port

SKU:: P2170

4 ½ digit multi-function display with bargraph

ESR measurement (equivalent series resistance)

basic accuracy: 0,3 % at 0,01 % resolution

auto LCR detection

pass / fail component sorting function

relative value measurement, data-hold function

measuring frequency switchable 100/120 Hz, 1/10/100 kHz

PeakTech

PeakTech 2170, LCR-/ESR Meter, 100Hz - 100kHz, with USB Port

333,08 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 2175, LCR Meter, 4 1/2 Digits

SKU:: P2175

4 1/2 digit, 27 mm LCD-display

with backlight and data hold

big measuring ranges for a wide range of applications

modern housing design with non-slip - resistant and shockproof housing

MIN/MAX-HOLD

relative measurement

Diode - and continuity test

Auto power off and IP67 dust- and waterproof

PeakTech

PeakTech 2175, LCR Meter, 4 1/2 Digits

101,03 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 2275, DC Electronic Load with USB, max. 150W

SKU:: P2275

Digitally controlled electronic load up to 30 A

For DC voltages up to 360 V

150 W input power

Constant-modes for voltage, current, resistance and power

High accuracy measurement LC-display

Battery test mode

Dynamic load test function

Voltage Sense Input, external Trigger Input

PeakTech

PeakTech 2275, DC Electronic Load with USB, max. 150W

523,48 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 2275, DC Electronic Load with USB, max. 300W

SKU:: P2280

Digitally controlled electronic load up to 30 A

For DC voltages up to 360 V

300 W input power

Constant-modes for voltage, current, resistance and power

High accuracy measurement LC-display

Battery test mode

Dynamic load test function

Voltage Sense Input, external Trigger Input

PeakTech

PeakTech 2275, DC Electronic Load with USB, max. 300W

831,81 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Out of stock

PeakTech

PeakTech 2710, Digital RCD Tester for Trigger Characteristic

SKU:: P2710

3-digit LCD display with backlight

Normal (N) or Selective (S) -type RCD test

Applicable measurement standards: IEC 61557-6, NF EN 61557-6, VDE 0413-6

Safety: EN-61010-1; CAT III 600 V, IP40, double insulated housing

PeakTech

PeakTech 2710, Digital RCD Tester for Trigger Characteristic

190,28 € *

Go to item

No longer available

PeakTech

PeakTech 2755, Installation Safety Tester

SKU:: P2755

8.9 cm (3.5 ") TFT color display with backlight

For measurements according to DIN VDE 0100/0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364

Bluetooth interface for data transfer to a smart phone via Android or iOS App

USB interface for evaluation on PC

Internal memory and SD card for data recording

PeakTech

PeakTech 2755, Installation Safety Tester

963,78 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3385, Analogue Multimeter 10A AC/DC

SKU:: P3385

analogue pointer meter

20ranges; 75 mm mirror scale

sensitivity: 20 kOhm/V DC - 9 kOhm/V AC

continuity test with acoustic buzzer

PeakTech

PeakTech 3385, Analogue Multimeter 10A AC/DC

47,48 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3432, Fuse Finder/Mains Circuit Detector Kit

SKU:: P3432

Set of transmitter and receiver
Suitable for mains circuits with Schuko sockets (CEE 7/7)
Usable as:
Fuse finder
Contactless voltage tester
Socket tester
30mA RCD tester

PeakTech

PeakTech 3432, Fuse Finder/Mains Circuit Detector Kit

73,66 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

In stock

PeakTech

PeakTech 3433, Digital Material Locator, Wood/Cable Finder

SKU:: P3433

Inverted 6cm (2.4") LCD display with backlight
Reliably finds wood, metal and live cables
Display for magnetic and non-magnetic metals
Distance display (max. 120mm) for detected metals
Warning indicator for live lines
Visual and audible warnings with additional LED
IP54 dust and water protected
Accessories: Carrying case, battery and user manual

PeakTech

PeakTech 3433, Digital Material Locator, Wood/Cable Finder

54,62 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3434, Acoustic Wire Detector and Tone Generator

SKU:: P3434

Transmitter modulates 1 kHz signal to connected line

Reliably identifies electrical conductors, telephone and network cables

With acoustic signal via loudspeaker or headphone connection

Adjust the volume / sensitivity with the rotary wheel

Condition assessment of active telephone lines

Integrated continuity tester

PeakTech

PeakTech 3434, Acoustic Wire Detector and Tone Generator

53,43 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

In stock

PeakTech

PeakTech 3440, Graphical Multimeter, 4 5/6 Digit, Bluetooth

SKU:: P3440

4 5/6-digits measurement value display (max. 49999)

5.6cm (2.2 ") TFT color display with backlighting

Graphical user interface with menu control

Data logger function with graph

Internal memory for 10.000 measured values (Datalogger 20.000)

Bluetooth interface for data transfer to a smart-phone via Android or iOS App

App for smart-phones to download

PeakTech

PeakTech 3440, Graphical Multimeter, 4 5/6 Digit, Bluetooth

237,88 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3441, Robust True RMS Digital Multimeter, 4 5/6 Digits

SKU:: P3441

4 5/6-digits measurement value display (max. 59999)

LCD display with relative value measurement

42-segment bargraph

True RMS measurement

Continuity and diode test

Auto-Hold, Min, Max and AVG function

4-20mA % current loop measurement

Duty cycle (Hz / %)

PeakTech

PeakTech 3441, Robust True RMS Digital Multimeter, 4 5/6 Digits

154,58 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3445, Digital Multimeter with Illuminated Buttons, 6,000 Counts, 1000VAC/DC, TrueRMS, Bluetooth, IP67

SKU:: P3445

Automatic illuminated function keys and rotary switch
Integrated powerful LED flashlight
Bluetooth 4.0 interface for data transfer to Android or iOS smartphones
TrueRMS measurements
ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
3 5/6-digits measurement value display (max. 5999)
LCD display with relative-value measurement and 42-segment bargraph
Continuity with buzzer and diode test
Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
Heavy duty case, IP67 dust and waterproof
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
New App for "Vuzix" Augmented Reality Smart Glasses available

PeakTech

PeakTech 3445, Digital Multimeter with Illuminated Buttons, 6,000 Counts, 1000VAC/DC, TrueRMS, Bluetooth, IP67

148,63 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

SKU:: P3450

True RMS multimeter with 6,000 counts
Data logger and trend display
80 x 80 pixels thermal imaging camera
PC software for thermal image analysis and datalogger
7cm (2.8") multi-line TFT display
Graphical user interface with menu control
Data logger function with graph
Bluetooth interface for data transfer to a mobile phone
Lithium-polymer battery with external charger
IP65 dust-proof and water-resistant
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V

PeakTech

PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

831,81 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3705, Digital Capacitance Tester

SKU:: P3705

capacity measuring range: 0.1pF to 20mF in 9 ranges

resistance measuring range: 0.01Ohm to 2.000MOhm in 9 ranges

diode and continuity test with buzzer

transistor hFE test

PeakTech

PeakTech 3705, Digital Capacitance Tester

47,48 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 4046, Arbitrary Waveform Generator, 1µHz-160MHz

SKU:: P4046

große 11 cm (4.3“) TFT-digital display for beide Kanäle gleichzeitig

Zweikanal- output with identischer resolution

1µHz- Frequenzauflösung for die gesamte Bandbreite

high 500 MSa/s Sampling Rate bei 14 Bit vertikaler resolution

über 140 verschiedene Standard- and Arbitrary Wellenformenintegriert

viele Modulationsarten

Kanalkopplung, Sweep- and Burst-Funktion

Integrierter 350 MHz Frequenzzähler with 7 Digit- resolution

software zur Fernsteuerung and Wellenformbearbeitung

USB-Host, USB-Device and LAN-interface

PeakTech

PeakTech 4046, Arbitrary Waveform Generator, 1µHz-160MHz

1.665,88 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 4090, Digital Bench Type Multimeter, 4 1/2 digits

SKU:: P4090

4 1/2-digit, 21 mm LCD-display (max. 22000 counts) with backlight

True RMS

Autoranging and manual range selection

Relative function

DATA-, MAX/MIN-HOLD

Diode-, continuity-test

USB-interface

PeakTech

PeakTech 4090, Digital Bench Type Multimeter, 4 1/2 digits

356,88 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech 4094, Graphical Bench Mulitmeter, 4 4/5 Digit,...

PSE Priggen

PeakTech 4094, Graphical Bench Mulitmeter, 4 4/5 Digit, with TFT and RS-232

SKU:: P4094

4 4/5 digit (55,000 counts) 3.7 "TFT graphic display (480x320 pixels)
Up to 65 readings per second
Internal data recording for up to 1000 measuring points
Minimum, maximum and measured value hold function
AVG average measurement and relative value function
dB and dBm measuring function for ACV and DCV measuring range
Dual function for simultaneous measurements of two measuring functions
Diode test & continuity test
RS-232 interface for data transmission
Control and data transfer possible via SCPI protocol
Safety: EN 61010-1; CAT I 1000V / CAT II 600V

PSE Priggen

PeakTech 4094, Graphical Bench Mulitmeter, 4 4/5 Digit, with TFT and RS-232

296,31 € *

Go to item

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 4095, Graphical Bench-Type Multimeter, 4 1/2-digit, USB, LAN, RS-232

SKU:: P4095

4 1/2 digits (60000 counts) 4" TFT-Graphics Display (480x320 Pixels)

Up to 150 measurments per second

Datalogger for up to 1 Mio. points (internal) or 100 Mio. Points (external) / 5ms Intervall

True RMS measurement up to 100 kHz -depending on meas. function

Automatic and manual range selection,AVG-, MIN/MAX and relative- function

Diode/continuity test and 2- or 3-wire Resistance-Temperature Detector (RTD) or Themocouple measurement

Temperature measurement compatible with: Type-B / E / J / K / N / R / S / T or PT100 / PT385

PeakTech

PeakTech 4095, Graphical Bench-Type Multimeter, 4 1/2-digit, USB, LAN, RS-232

606,78 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

What types of electrical measuring instruments does PSE Priggen offer?

In this category you will find digital multimeters, clamp meters, voltage testers, power and resistance meters, insulation testers, installation testers, service instruments, cable tracers, cable testers and suitable accessories. This covers typical tasks in installation, service, maintenance and test benches.

What is the difference between multimeters, clamp meters and voltage testers?

A multimeter combines several measurements in one instrument (e.g. voltage, current, resistance, sometimes frequency or temperature). Clamp meters measure current without breaking the circuit by clamping around the conductor – ideal for maintenance and troubleshooting. Two-pole voltage testers are designed for fast and safe voltage and continuity tests on installations.

Which electrical measuring instrument is best for my application?

This depends on your task and environment: For general electrical work, a robust true-RMS multimeter is often the best starting point. For higher currents or live systems, clamp meters are suitable. Installation testers and insulation testers are used for compliance testing of electrical installations, while power meters and power analyzers are ideal for energy optimisation and power quality analysis. If you describe your measurement task, we will recommend suitable instruments

What do measurement categories such as CAT II, CAT III or CAT IV mean?

The measurement category (e.g. CAT II, CAT III, CAT IV) indicates for which parts of the electrical installation a tester may safely be used. CAT III instruments are intended, for example, for distribution boards and fixed installations, while CAT IV instruments are suitable for measurements at the service entrance or source of the installation. Always ensure that the category and rated voltage match your application and use only instruments with appropriate safety approvals.

Are your instruments suitable for three-phase and 3-phase systems?

Many clamp meters, multimeters, power meters and power analyzers can be used in three-phase systems to measure currents, voltages, active and reactive power and power factor. For more detailed network analysis, specialised 3-phase instruments and power analyzers are available. The product descriptions list the supported measurement functions and voltage ranges.

Can electrical measuring instruments be connected to PCs, data loggers or control systems?

Selected instruments provide interfaces such as USB, RS-485/Modbus or other digital outputs. This allows you to log, document and integrate measurement data into higher-level systems. The technical data specify which interfaces each instrument supports; if required, we will help you choose a suitable combination of instrument, data logger and software.

Do you offer electrical instruments with calibration or test certificates?

Yes, calibration and test certificates are available for many instruments, especially for multimeters, insulation testers, power meters and power analyzers. Depending on the application, factory test reports or standard-compliant calibrations may be appropriate. Let us know which quantities and ranges you need to be certified and we will check the available options.

Can you help me select and configure a suitable set of test instruments?

Yes, absolutely. If you tell us about your typical tasks (e.g. installation, panel building, service, test bench work), voltage ranges, standards/requirements and your budget, we will put together a suitable set – for example consisting of a multimeter, clamp meter, voltage tester, insulation tester and accessories. This way you get a solution that fits technically and pays off in daily use.

Best sellers

TA138 Pico Current Clamp 200A AC, Banana Plugs

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

80,92 € *

Best sellers

Peak Tech 3360, Professional Digital Multimeter, 4 3/4-dgt., IP67

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

118,88 € *

Best sellers

TA018 Pico Current Clamp 20A/60 A AC/DC with BNC plug

Available

134,47 € *

Best sellers

Peak Tech 1660, Digital Power Clamp Meter, 4-digit, 750kW, with USB

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

202,18 € *

Best sellers

BNC measuring lead, 1.2m MI030

Available
: 1 - 3 Workdays (DE - int. shipments may differ)

16,66 € *

Electrical test instruments for installation and service

Electrical test instruments measure voltage, current, resistance, power and insulation resistance. They are essential tools for electricians, service technicians and test labs. This category covers digital multimeters, current clamps, voltage testers, installation testers, insulation testers and further electrical test equipment.

Multimeters, current clamps and voltage testers

Digital multimeters combine several measuring functions in one instrument and TRUE-RMS meters provide reliable readings even on distorted waveforms. Current clamps measure currents without disconnecting the conductor and are ideal for maintenance and troubleshooting. Two-pole voltage testers and continuity testers form the basic kit of every electrician.

Installation testers and insulation testers

Installation testers check electrical installations in accordance with relevant standards by measuring loop impedance, RCD tripping times and insulation resistance. High-voltage insulation testers are used on motors, cables, transformers and switchgear to assess their condition.

Power meters and power quality analyzers

Power meters and analyzers capture active and reactive power, power factor and harmonics. They support energy optimization, power quality analysis and troubleshooting in complex drive systems.

Selection criteria

Key factors include measurement categories (CAT), ranges, accuracy, protection class, safety standards and ease of use. Rugged housings, shock resistance and readable displays are essential in professional environments.

Benefits of professional electrical test instruments

Professional electrical test instruments provide a high level of safety and reliable readings under demanding conditions. Accessories and calibration options enable standard-compliant and fully documented measurements.