Industrial Measurement Technology for Energy, Process & Machinery – 3-Phase Meters, Panel Instruments & Transmitters

3 Phase Devices
3 Phase Devices
Built-In Instruments
Built-In Instruments
Tachometer
Tachometer
Limiter
Limiter
Measuring Transducers
Measuring Transducers
Isolating Signal Converter TV 500L for DIN Rail Mounting
Senseca
Isolating Signal Converter TV 500L for DIN Rail Mounting
SKU:
TV500Lff
Variations in:
  • Supply Voltage
  • Eingänge
Item weight:
0,15 kg
  • full 3-port isolation
  • input: 0/4...20mA and 0/2...10VDC
  • output 0/4...20mA and 0/2...10VDC
  • increasing output characteristic
  • supply voltage: 230VAC or 24VDC
  • power-on LED
  • 22,5mm case for DIN rail mounting
    • Senseca
    Isolating Signal Converter TV 500L for DIN Rail Mounting
    170,17 € *
    Go to item
    • Available
    LED Bargraph Display, Vertical, 24 x 96mm
    PSE Priggen
    LED Bargraph Display, Vertical, 24 x 96mm
    SKU:
    MB1-33RVOff
    Variations in:
    • Supply Voltage
    Item weight:
    0,09 kg
    • 30 segments bargraph display
    • vertical front panel mounting, 24 x 96mm 
    • segment colour: red/green selectable, optionally blue/red, orange/green  
    • small mounting depth: 60mm without the pluggable screw terminal
    • parametrization via HEX switch and  push button 
    • factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
    • free adjustment at the input signal possible 
    • 8 different types of presentation, parametrizable as bar, dot/point or curtain  
    • free direction selection and central display (for example, beams out of the centre) 
    • stepwise brightness control 
    • protection rate IP65 on the front
    • plug-in screw terminal
    PSE Priggen
    LED Bargraph Display, Vertical, 24 x 96mm
    207,06 € *
    Go to item
    • Available
    TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2...
    Senseca
    TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
    SKU:
    TS500-Ex-2R-0
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Inputs intrinsically safe acc to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contacts
  • Supply voltage 230 VAC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-Ex-2R-0, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 230VAC
    197,54 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Limit Value Switch GS125L with Universal Input, 24VDCl
    Senseca
    Limit Value Switch GS125L with Universal Input, 24VDCl
    SKU:
    GS125L-2-1-00
    • universal input for industry standard signals, Pt100, thermocouple and potentiometer
    • 2 relay outputs
    • 4-20mA output
    • adjustable min/max contact function 
    • 2-colour illuminated  scales for limit value adjustment
    • monitoring of sensor break and short-circuit with Pt100 sensors
    • auxiliary voltage 24VDC
    • functional safety up to SIL2
    • housing width only 12.5mm
    • removable coded terminals
    • carrier rail mounting TS35 EN60715
    • safe galvanic isolation between input/output and auxiliary voltage
    Senseca
    Limit Value Switch GS125L with Universal Input, 24VDCl
    214,68 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2...
    Senseca
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    SKU:
    TS500-Ex-2R-5
  • Inputs for switching contact, proximity switch Namur type acc. to DIN EN 60947-5-6 or opto-coupler
  • Inputs intrinsically safe acc. to ATEX II (1) G [Ex ia] IIC/IIB, ATEX II (1) D [Ex iaD]
  • Switchable line fault detection for broken and shorted lines
  • Output relays SPDT contact>
  • Supply voltage 24VDC
  • Power on LED, status / error LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    TS500-Ex-2R-5, 2-Channel Isolating Switching Repeater, 2 Relay Outputs, 24VDC
    197,54 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    STL50-1-1R-0, Safety Temperature Limiter for PT100...
    Senseca
    STL50-1-1R-0, Safety Temperature Limiter for PT100 Sensor, 230VAC
    SKU:
    STL50-1-1R-0
    Item weight:
    0,49 kg
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for RTD Pt100 sensor
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
    • Senseca
    STL50-1-1R-0, Safety Temperature Limiter for PT100 Sensor, 230VAC
    635,46 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GLMU200MP-TR, Conductivity Measuring Transducer incl....
    Senseca
    GLMU200MP-TR, Conductivity Measuring Transducer incl. 2-pole Measuring Cell
    SKU:
    GLMU200MP-TR-L01
  • Compact conductivity measuring cell for drinking/fresh water
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display of the conductivity or the temperature
  • Exchangeable unit labels
    • Senseca
    GLMU200MP-TR, Conductivity Measuring Transducer incl. 2-pole Measuring Cell
    563,70 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    LUMEL
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    SKU:
    ND10ff
    Variations in:
    • Input Current
  • Measurements of up to 52 mains network parameters
  • Power supply via the measuring circuit
  • The displays take into account the values of programmed transformation ratios for upstream instrument transducers
  • Modbus RS-485 communication interface
  • Free eCon software
  • Two alarm outputs
  • Pulse output
  • Backlit 3.5" LCD display
  • 3 years warranty
    • LUMEL
    ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm
    212,13 € *
    Go to item
    • Available
    STL50-1-1R-5, Safety Temperature Limiter for PT100...
    Senseca
    STL50-1-1R-5, Safety Temperature Limiter for PT100 Sensor, 24VDC
    SKU:
    STL50-1-1R-5
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for RTD Pt100 sensor
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
    • Senseca
    STL50-1-1R-5, Safety Temperature Limiter for PT100 Sensor, 24VDC
    727,09 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    STL50-5-1R-0, Safety Temperature Limiter for...
    Senseca
    STL50-5-1R-0, Safety Temperature Limiter for Thermocouples, 230VAC
    SKU:
    STL50-5-1R-0
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for double thermocouples type J, K, N and S 
  • Auxiliary voltage: 230VAC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
    • Senseca
    STL50-5-1R-0, Safety Temperature Limiter for Thermocouples, 230VAC
    661,24 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    STL50-5-1R-5, Safety Temperature Limiter for...
    Senseca
    STL50-5-1R-5, Safety Temperature Limiter for Thermocouples, 24VDC
    SKU:
    STL50-5-1R-5
    Shipping weight:
    0,55 kg
    Item weight:
    0,50 kg
  • Useful as temperature limiter/-guard and exhaust gas temperature limiter
  • Input for double thermocouples type J, K, N and S 
  • Auxiliary voltage: 24VDC
  • Alarm output: 1 relay SPDT
  • Programming via backlit LCD graphic display
  • Certified according to DIN EN 14597 SIL 2
    • Senseca
    STL50-5-1R-5, Safety Temperature Limiter for Thermocouples, 24VDC
    727,09 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Isolating Signal Converter TV500
    Senseca
    Isolating Signal Converter TV500
    SKU:
    TV500-10-ff
    Variations in:
    • Auxiliary Voltage
    Item weight:
    0,20 kg
  • Inputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Outputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Auxiliary voltage: 100...265VAC or 10.8...30VAC/DC
    • Senseca
    Isolating Signal Converter TV500
    261,80 € *
    Go to item
    • Available
    ST500Ex-10-0, Intrinsically Safe Universal Isolating...
    Senseca
    ST500Ex-10-0, Intrinsically Safe Universal Isolating Signal Converter, 230VAC
    SKU:
    ST500 Ex-10-0
    Item weight:
    0,12 kg
  • Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD]
  • 2 power-supply-designs with wide range of allowed supply voltage:
  • 10 ... 30VDC / AC oder 85 ... 253VAC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20mA and 0(2) ... 10V
    • Senseca
    ST500Ex-10-0, Intrinsically Safe Universal Isolating Signal Converter, 230VAC
    347,48 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    ST500Ex-10-5, Intrinsically Safe Universal Isolating...
    Senseca
    ST500Ex-10-5, Intrinsically Safe Universal Isolating Signal Converter, 24VAC/DC
    SKU:
    ST500Ex-10-5
    Item weight:
    0,12 kg
    Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD] 2 power-supply-designs with wide range of allowed supply voltage: 10 ... 30 V DC / AC oder 85 ... 253 V AC Electrically isolated: between input / output / supply voltage 22.5 mm standard case for rail mounting TS35 Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    Senseca
    ST500Ex-10-5, Intrinsically Safe Universal Isolating Signal Converter, 24VAC/DC
    347,48 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TG50Ex-3-2R-00-00-5, Temperature Guard, 24VDC
    Senseca
    TG50Ex-3-2R-00-00-5, Temperature Guard, 24VDC
    SKU:
    TG50Ex-5
    Shipping weight:
    0,55 kg
    Item weight:
    0,50 kg
    TG50Ex-3-2R-00-00-5, Temperature Guard, Supply Voltage: 24VDC
    Senseca
    TG50Ex-3-2R-00-00-5, Temperature Guard, 24VDC
    664,73 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Frequency Analog Transmitter FT500
    Senseca
    Frequency Analog Transmitter FT500
    SKU:
    FT500ff
    Variations in:
    • Supply Voltage
  • Frequency ranges from 0...0.01Hz/20kHz programmable
  • Start and end value of the measuring range programmable
  • Multipurpose inputs for 24V sensors, switching contacts and Namur actors
  • Integrated transmitter supply
    • Senseca
    Frequency Analog Transmitter FT500
    533,36 € *
    Go to item
    • Available
    Best sellers
    GMUD MP-, Pressure Measuring Transducer
    Senseca
    GMUD MP-, Pressure Measuring Transducer
    SKU:
    GMUD MP-ff
    Variations in:
    • Measuring Range:
    Item weight:
    0,28 kg
  • freely scalable
  • selectable 4-20mA / 0-10V
  • with display
  • switching output
    • Senseca
    GMUD MP-, Pressure Measuring Transducer
    268,94 € - 357,00 € *
    Go to item
    • Available
    MU500-Ex-ia-51-..., Intrinsically Safe Temperature...
    Senseca
    MU500-Ex-ia-51-..., Intrinsically Safe Temperature Transmitter for PT100 Probes, Electrically Isolated
    SKU:
    MU500-Ex-51-ff
    Variations in:
    • Supply Voltage:
    Item weight:
    0,26 kg
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 13 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
  • Input intrinsically safe ATEX II (1) G [Ex ia] IIC, II (1) D [Ex iaD]
    • Senseca
    MU500-Ex-ia-51-..., Intrinsically Safe Temperature Transmitter for PT100 Probes, Electrically Isolated
    446,25 € *
    Go to item
    • Available
    ND20Lite, 3-Phasen- Einbau- Messgerät für...
    LUMEL
    ND20Lite, 3-Phasen- Einbau- Messgerät für Stromnetz- Parameter, 96 x 96mm
    SKU:
    ND20LITE22100M1
  • Measurements of  mains network parameters
  • Programmable input current range: 1A or 5A
  • Programmable input voltage range: 3 x 57.7/100V,  3 x 69.3/120V or 3 x 230/400V
  • Power supply via the measuring circuit
  • High accuracy class
  • The displays take into account the values of programmed transformation ratios for upstream instrument transducers
  • Modbus RS-485 communication interface
  • One alarm output
  • Pulse output
  • Backlit 3.5" LCD display
  • 3 years warranty
    • LUMEL
    ND20Lite, 3-Phasen- Einbau- Messgerät für Stromnetz- Parameter, 96 x 96mm
    282,23 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Temperature Measuring Transducer MU125M with Universal Input
    Senseca
    Temperature Measuring Transducer MU125M with Universal Input
    SKU:
    MU125M
  • Universal input for Pt100, Pt1000, thermocouple, NTC and resistance measuring value
  • Configuration via front DIP switches
  • Analog actual value output 4-20mA
  • Zero point and limit value can be adjusted via trim potentiometers on the front
  • With Pt100 and Pt1000 sensors, monitoring of sensor break and short-circuit
  • Wide-range mains adapter: 20-125VDC snd 20-253VAC
  • Removable coded screw terminals
  • Housing width 12.5 mm
  • Carrier rail mounting TS35 EN60715
    • Senseca
    Temperature Measuring Transducer MU125M with Universal Input
    188,02 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V...
    Senseca
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V und 0/4-20mA, Output: -10-10V and -20-20mA, 230VAC
    SKU:
    TV500L-110-0
    Item weight:
    0,15 kg
    • full 3-port isolation
    • input: 0/4...20mA and 0/2...10VDC
    • output -20...+20mA and +10...+10VDC
    • increasing output characteristic
    • supply voltage: 230VAC
    • power-on LED
    • 22,5mm case for DIN rail mounting
    Senseca
    TV500L-110-0 Isolating Signal Converter, Input 0/2-10V und 0/4-20mA, Output: -10-10V and -20-20mA, 230VAC
    220,15 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Limit Value Switch GS125L with Universal Input, 24VDCl
    Senseca
    Limit Value Switch GS125L with Universal Input, 24VDCl
    SKU:
    GS125L-1-0-00
    • universal input for industry standard signals, Pt100, thermocouple and potentiometer
    • 2 relay outputs
    • 4-20mA output
    • adjustable min/max contact function 
    • 2-colour illuminated  scales for limit value adjustment
    • monitoring of sensor break and short-circuit with Pt100 sensors
    • auxiliary voltage 24VDC
    • functional safety up to SIL2
    • housing width only 12.5mm
    • removable coded terminals
    • carrier rail mounting TS35 EN60715
    • safe galvanic isolation between input/output and auxiliary voltage
    Senseca
    Limit Value Switch GS125L with Universal Input, 24VDCl
    153,51 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    LUMEL
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    SKU:
    LLM3ff
    Variations in:
    • Variant
  • Indication of the presence of the three phase voltages towards neutral wire
  • Display voltage range: 3 x 230 ... 400VAC
  • DIN rail mounting for the installation in the control cabinet
  • External optional indication for the control cabinet door
  • 3 years warranty
    • LUMEL
    LLM3, 3-Phase Live Line Indicator for DIN Rail Mounting
    119,01 € - 168,99 € *
    Go to item
    • Available
    M1, Digital LED Panel Meter, 4-Digits, with Universal...
    PSE Priggen
    M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²
    SKU:
    M1-7UR4A.000X.372AD
  • universal measuring input for DC voltage, DC current, Pt100(0), thermocouple, frequency, rotational speed, counter
  • red display of -1999 to +9999 eigits
  • low installation depth 
  • digit heigth 10mm
  • Min/max- walue capture
  • 5 parameterizable support points
  • indicator flashes when the limit valus are exceeded
  • tare function
    • PSE Priggen
    M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²
    189,57 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    MR50, Limit Value Switch for Standard Signals
    Senseca
    MR50, Limit Value Switch for Standard Signals
    SKU:
    MR50ff
    Variations in:
    • Auxiliary Voltage /Number of Outputs
    • Standard Signal Input: 0/4...20mA, 0/2...10VDC
    • Programmable measuring range
    • 2 or 4 Relay alarm outputs
    Senseca
    MR50, Limit Value Switch for Standard Signals
    398,65 € - 506,94 € *
    Go to item
    • Available
    Best sellers
    MU500-53-..., Universal Transmitter for Pt1000 Probes
    Senseca
    MU500-53-..., Universal Transmitter for Pt1000 Probes
    SKU:
    MU500-53ff
    Variations in:
    • Supply Voltage:
  • Electrically isolated: between input / output / supply voltage
  • 2 power-supply-designs with wide range of allowed supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • 16 measuring ranges, selectable via rotary switch at front panel
  • Offset and span adjustable
    • Senseca
    MU500-53-..., Universal Transmitter for Pt1000 Probes
    374,85 € *
    Go to item
    • Available
    N43, Meter for Mains Network Parameters, LCD Display, DIN...
    LUMEL
    N43, Meter for Mains Network Parameters, LCD Display, DIN Rail Mounting
    SKU:
    N43ff
    Variations in:
    • Input Voltage/Supply Voltage
  • RMS measurement of AC voltage and current, active, reactive and apparent power, active and reactive energy, power factor, frequency, THD
  • The displays consider the values of programmed transformation ratio of upstream measuring transformers
  • 3 programmable alarm outputs and 1 pulse output
  • Digital data transfer to master devices via RS-485 (MODBUS).
  • Pulse output to control the 3-phase active energy
  • 3 years warranty 

     

    • LUMEL
    N43, Meter for Mains Network Parameters, LCD Display, DIN Rail Mounting
    342,37 € - 379,40 € *
    Go to item
    • Available
    OXY 3610 MP, O2 Transducer for Dissolved Oxygen in...
    Senseca
    OXY 3610 MP, O2 Transducer for Dissolved Oxygen in Liquids, incl. Sensor
    SKU:
    OXY3610MP
  • measuring ranges: 0.0 to 25.0mg/l  O2 (dissolved); 0.0 to +50.0°C
  • output signal: 4-20mA
  • auxiliary energy: 12 -30VDC
  • connection: 5-pin jack connector, screwable
    • Senseca
    OXY 3610 MP, O2 Transducer for Dissolved Oxygen in Liquids, incl. Sensor
    721,14 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    OXY 3690 MP-0-GGO-A1-L01, O2 Transducer for Air Oxygen...
    Senseca
    OXY 3690 MP-0-GGO-A1-L01, O2 Transducer for Air Oxygen Measurements, incl. Sensor
    SKU:
    OXY3690MP
  • measuring ranges: 0.0 to 100.0% O2 (gaseous); -20.0 to +50.0°C
  • output signal: 4-20mA
  • auxiliary energy: 12 -30VDC
  • connection: 5-pin jack connector, screwable
    • Senseca
    OXY 3690 MP-0-GGO-A1-L01, O2 Transducer for Air Oxygen Measurements, incl. Sensor
    721,14 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    Passive Isolation amplifier TV500P, 2 channels, input:...
    Senseca
    Passive Isolation amplifier TV500P, 2 channels, input: 4-20mA and 2-10VDC, outputs: 4-20mA passive, increasing characteristic
    SKU:
    TV500P-2-100-00
    Passive Isolation amplifier TV500P, 2 channels, input: 4-20mA and 2-10VDC, outputs: 4-20mA passive, increasing characteristic
    Senseca
    Passive Isolation amplifier TV500P, 2 channels, input: 4-20mA and 2-10VDC, outputs: 4-20mA passive, increasing characteristic
    252,28 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    PeakTech
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    SKU:
    P2795
  • measurement type: rotation speed, total revolutions,frequency, surface speed  and length 
  • wide measure range and high resolution
  • 40 reading memories: MAX, MIN, AVG, DATA
  • laser targeting (class II laser; < 1 mW)
    • PeakTech
    Peak Tech 2795, Tachometer Photo-Contact-Type with Laser
    99,84 € *
    Go to item
    • Available
    • : 6 - 8 Workdays  (DE - int. shipments may differ)
    PM-TOOL-USB, PC-based Configuration Software for Display...
    PSE Priggen
    PM-TOOL-USB, PC-based Configuration Software for Display Devices without a Keyboard
    SKU:
    PM-TOOL-USB
    PM-TOOL-USB, PC-based Configuration Software for Display Devices without a Keyboard
    PSE Priggen
    PM-TOOL-USB, PC-based Configuration Software for Display Devices without a Keyboard
    34,51 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    TC500-60-, Thermocouple Transmitter
    Senseca
    TC500-60-, Thermocouple Transmitter
    SKU:
    TC500-60-ff
    Variations in:
    • Supply Voltage:
  • suitable for thermocouples type J, K and S
  • integrated cold-junction compensation ;
  • sutput signal switch selectable
    • Senseca
    TC500-60-, Thermocouple Transmitter
    374,85 € *
    Go to item
    • Available
    Best sellers
    TV 500L-110-5, Isolating Signal Converter for DIN Rail...
    Senseca
    TV 500L-110-5, Isolating Signal Converter for DIN Rail Mounting, Input 0/2-10V and 0/4-20mA, Output: -10-10V and -20-20mA, 24VDC
    SKU:
    TV500L-110-5
    Item weight:
    0,15 kg
    • full 3-port isolation
    • input: 0/4...20mA and 0/2...10VDC
    • output -20...+20mA and +10...+10VDC
    • increasing output characteristic
    • supply voltage: 24VDC
    • power-on LED
    • 22,5mm case for DIN rail mounting
    Senseca
    TV 500L-110-5, Isolating Signal Converter for DIN Rail Mounting, Input 0/2-10V and 0/4-20mA, Output: -10-10V and -20-20mA, 24VDC
    220,15 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    Senseca
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    SKU:
    ST500-10-0
    Item weight:
    0,11 kg
  • Wide supply voltage range: 100 ... 265V AC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    • Senseca
    Universal Isolating Signal Converter ST500-10-0, 230VAC
    290,36 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    Senseca
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    SKU:
    ST500-10-5
    Item weight:
    0,11 kg
  • Supply voltage range: 10.8 ... 30V AC/DC
  • Electrically isolated: between input / output / supply voltage
  • 22.5 mm standard case for rail mounting TS35
  • Universal inputs/outputs for (0)4 ... 20 mA and 0(2) ... 10 V
    • Senseca
    Universal Isolating Signal Converter ST500-10-5, 24V AC/DC
    290,36 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    Best sellers
    VT500-30-, AC Voltage Transmitter
    Senseca
    VT500-30-, AC Voltage Transmitter
    SKU:
    VT500-30-ff
    Variations in:
    • Supply Voltage:
    VT 500-30-, AC Voltage Transmitter
    Senseca
    VT500-30-, AC Voltage Transmitter
    360,69 € *
    Go to item
    • Available
    Best sellers
    Resistance Transmitter RT500
    Senseca
    Resistance Transmitter RT500
    SKU:
    RT500ff
    Variations in:
    • Supply Voltage
  • Resistance measuring range from 0 to 50 Ohm up to 100 kOhm 
  • 12 Bit AD/DA processor technology with 250Hz realtime execution 
  • Teach-in programming for initial and final value 
  • 2- and 3-wire connection
  • Outputs for 0/4-20mA, simultaneous 0/2-10V
  • Increase or decrease output characteristic programmable
  • Operation mode indicated by 2-colour LED
  • 22.5mm case for DIN rail mounting
    • Senseca
    Resistance Transmitter RT500
    309,40 € *
    Go to item
    • Available
    Analog Frequency Transmitter AF500
    Senseca
    Analog Frequency Transmitter AF500
    SKU:
    AF500ff
    Variations in:
    • Supply Voltage
  • output frequency form 0...0.01Hz/20kHz programmable
  • inputs for 0/4...20mA, 0/2...10VDC
  • teach-in programming for analog start and end value
  • outputs transistor and relay SPDT
  • power and programming indicator via 2-colour LED
    • Senseca
    Analog Frequency Transmitter AF500
    460,53 € *
    Go to item
    • Available
    Bargraph & Digital Display, Panel Meter, 96x24mm²
    PSE Priggen
    Bargraph & Digital Display, Panel Meter, 96x24mm²
    SKU:
    MB-3ff
    Variations in:
    • Mounting/auxiliary voltage
  • combo panel meter for 0-300VDC and 0-1ADC
  • red 3-digit digital display -199...999 digits (optional green display)
  • 30-points-bargraph tricolour
  • adjustable bargraph or dot operation or operation with permanent display of the midpoint
  • installation depth: 120 mm without plug-in screw terminal
  • version with multi voltage power supply: 100-240VAC/DC,
  • verison for low voltage supply: 10-40VDC /18-30VAC
  • display adjustment via factory setting or directly via sensor signal
  • min/max-memory with adjustable permanent display
  • 30 additional adjustable supporting points
  • display flashing at threshold value exceedance/undercut
  • zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation
  • flexible alarm system with adjustable delay times
  • volume metering (Totaliser)
  • mathematic functions like reciprocal value, root extraction, squaring and rounding
  • sliding averaging
  • programming interlock via access code
  • protection class IP65 at the front
  • plug-in screw terminal
    • PSE Priggen
    Bargraph & Digital Display, Panel Meter, 96x24mm²
    347,48 € *
    Go to item
    • Available
    CVT500, Current and Voltage Transmitter
    Senseca
    CVT500, Current and Voltage Transmitter
    SKU:
    CVT500-1/5-125/250ff
    Variations in:
    • Supply Voltage
  • Measuring input for DC and sinusoidal AC signals
  • Arithmetic average value measurement RMS calibrated
  • Frequency range 40...200Hz
    • Senseca
    CVT500, Current and Voltage Transmitter
    199,92 € *
    Go to item
    • Available
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA...
    Senseca
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA Signals, with EX Protection, Self-Supplying
    SKU:
    GIA0420N-ex
  • With EX protection for all potentially explosive atmospheres
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digits
  • High accuracy and minimum temperature offset by integrated self-calibration
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter guarantee a  steady reading also with noisy sensor signals
    • Senseca
    GIA 0420 N-ex, Freely Scalable LCD Display for 4-20mA Signals, with EX Protection, Self-Supplying
    239,19 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA...
    Senseca
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA Signals, Self-Supplying
    SKU:
    GIA0420N
  • Time-saving on-site scaling without the need of tools within seconds
  • Highest operation security by integrated self-diagnosis and watchdog funktion
  • Large display range of -1999 to 9999 digit
  • Big 10 mm high LCD display
  • Monitoring for sensor breakings, sensor short circuit, low and high range excess
  • Connectable software filter for a steady reading also with noisy sensor signals
    • Senseca
    GIA 0420 N, Freely Scalable LCD Display for 4-20mA Signals, Self-Supplying
    157,91 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GLMU200MP-TR-PG, Conductivity Measuring Transducer incl....
    Senseca
    GLMU200MP-TR-PG, Conductivity Measuring Transducer incl. 2-pole Measuring Cell with PG13.5 Thread
    SKU:
    607815
  • Compact conductivity measuring cell for drinking/fresh water
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display of the conductivity or the temperature
  • Exchangeable unit labels
    • Senseca
    GLMU200MP-TR-PG, Conductivity Measuring Transducer incl. 2-pole Measuring Cell with PG13.5 Thread
    618,80 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GLMU 400MP-SW, Conductivity Measuring Transducer incl....
    Senseca
    GLMU 400MP-SW, Conductivity Measuring Transducer incl. 4-Pole Measuring Cell
    SKU:
    GLMU400MP-SW-L01
  • High-quality conductivity measuring cell, insensitive to dirt
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display for the conductivity or temperature
  • Exchangeable unit labels
    • Senseca
    GLMU 400MP-SW, Conductivity Measuring Transducer incl. 4-Pole Measuring Cell
    726,02 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GMUD MP-F-MBF, Pressure Measuring Transducer for -25 to...
    Senseca
    GMUD MP-F-MBF, Pressure Measuring Transducer for -25 to +25mbar Difference Pressure
    SKU:
    GMUD MP-F-MBF
  • freely scalable
  • output switcheable 4-20mA / 0-10V
  • with display
  • switching output
    • Senseca
    GMUD MP-F-MBF, Pressure Measuring Transducer for -25 to +25mbar Difference Pressure
    556,92 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GMUD MP-, Pressure Measuring Transducer 0-150 mbar rel.
    Senseca
    GMUD MP-, Pressure Measuring Transducer 0-150 mbar rel.
    SKU:
    GMUD MP-S-MBS
  • freely scalable
  • output switcheable 4-20mA / 0-10V
  • with display
  • switching output
    • Senseca
    GMUD MP-, Pressure Measuring Transducer 0-150 mbar rel.
    343,91 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GODOX-200-PS, Optical Oxygen Transmitter for Continuous...
    Senseca
    GODOX-200-PS, Optical Oxygen Transmitter for Continuous Measurements in Salt Water
    SKU:
    GODOX-200-PS
  • Low-maintenance & robust 
  • Two 4-20mA (or 0-5V) outputs for concentration and saturation
  • Fully pressure and temperature compensated
  • Calibration in many applications once per year! 
  • No flow required
    • Senseca
    GODOX-200-PS, Optical Oxygen Transmitter for Continuous Measurements in Salt Water
    1.867,11 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GODOX-200-ST, Optical Oxygen Transmitter for Universal...
    Senseca
    GODOX-200-ST, Optical Oxygen Transmitter for Universal Applications, Stainless Steel
    SKU:
    GODOX-200-ST
  • Low-maintenance & robust 
  • Two 4-20mA (or 0-5V) outputs for concentration and saturation
  • Fully pressure and temperature compensated
  • Calibration in many applications once per year! 
  • No flow required
    • Senseca
    GODOX-200-ST, Optical Oxygen Transmitter for Universal Applications, Stainless Steel
    1.867,11 € *
    Go to item
    • Available
    • : 11 - 13 Workdays  (DE - int. shipments may differ)
    GPHU 014 MP-BNC, pH Transducer with On-Site Display and...
    Senseca
    GPHU 014 MP-BNC, pH Transducer with On-Site Display and Galvanic Isolation, without Electrode
    SKU:
    GPHU014MP-BNC_ff
    Variations in:
    • Analog Output
    • measuring range: 0.00 - 14.00pH
    • LCD display
    • automatic and manual temperature compensation
    • external Pt1000 temperature probe connectable
    • BNC socket for sensor connection
    • sensor input electrically isolated
    • 2-point calibration
    • analogue output: 4-20mA or 0-10V
    Senseca
    GPHU 014 MP-BNC, pH Transducer with On-Site Display and Galvanic Isolation, without Electrode
    393,89 € - 406,03 € *
    Go to item
    • Available
    You need help?
    Please send a message to priggen@priggen.com

    The “Industrial Measurement Technology” range includes 3-phase power meters, panel instruments for control panels and switchboards, tachometers, limit switches and signal transmitters. These devices allow you to measure, display, monitor and integrate electrical and process values in industrial plants and machinery.

    3-phase meters are used for monitoring and analysing three-phase power systems. They measure, for example, voltages, currents, active, reactive and apparent power, energy, frequency and often harmonic distortion. Typical applications include power distribution, panel building, machine and plant engineering, energy management and power quality monitoring.

    Panel instruments are meters that are permanently mounted in control panels, switchboards or machine fronts. They continuously display key process values such as voltage, current, power, frequency, temperature or pressure and provide quick visual feedback directly at the installation. They are used in power distribution, test benches, machinery and building services.

    Tachometers measure the speed of shafts, motors or fans and are used for process control, regulation or condition monitoring. Limit switches monitor values such as current, voltage, temperature or speed for upper or lower thresholds and activate relay or alarm outputs when limits are reached, helping to protect equipment and trigger warning

    Transmitters convert sensor signals – for example from current transformers, voltage inputs, temperature probes or process signals – into standardised output signals (such as 0…10 V, 4…20 mA or digital interfaces like RS-485/Modbus). These can then easily be fed into PLCs, controllers, SCADA systems or data loggers. Transmitters thus form the key link between field sensors and automation systems.

    Our products are used in industry, power utilities, machine and plant engineering, building services, test benches, laboratories and infrastructure/utilities. Typical applications include monitoring power systems, energy and load measurement, process monitoring, condition monitoring, panel and machine indication as well as integrating process values into control and SCADA systems.

    Yes. Many 3-phase meters, panel instruments and transmitters provide analogue outputs (e.g. 4…20 mA, 0…10 V) and/or digital interfaces such as RS-485/Modbus. This makes it easy to integrate measurement values into PLCs, SCADA systems, building management and data logging solutions. The technical data sheets specify which interfaces and protocols are supported.

    Yes, absolutely. If you tell us about your application, target parameters (e.g. voltage, current, power, speed), network or process details, required interfaces and mounting type (DIN rail, panel, cabinet), we will recommend suitable 3-phase meters, panel instruments, transmitters, tachometers or limit switches – and if required, a complete, well-matched package for your plant.

    Our Brands:

    Industrial measurement technology for machines and processes

    Industrial measurement technology comprises instruments, sensors and transmitters used to monitor and control machines, plants and energy systems. This category includes 3-phase power meters, panel instruments, tachometers, limit switches and transmitters for current, voltage, temperature, pressure and other process variables.

    Energy and power measurement

    Three-phase power meters and analyzers measure currents, voltages, active and reactive power and harmonics. They support energy optimization, load monitoring and power quality analysis in industrial installations.

    Panel instruments and displays

    Panel meters and process indicators display measured values directly in control panels or operator stations. They offer scalable inputs, alarm relays and interfaces for integration into control systems.

    Transmitters and limit switches

    Transmitters convert sensor signals into standardized current or voltage outputs and simplify connection to PLCs and SCADA systems. Limit switches monitor threshold values and trigger alarms or control actions when limits are exceeded.

    Industries and applications

    Typical applications include machinery and plant engineering, power generation and distribution, chemical and process industries, building automation and water/wastewater treatment.

    Benefits of professional industrial instrumentation

    Professional devices provide high accuracy, long-term stability and robust designs for harsh industrial environments. Flexible interfaces and configuration options facilitate integration into existing systems.