Measuring Transducers


  • Transmitter for electrical signals
  • Universal input for standard signals, Pt100, thermocouple, potentiometer, configuration via front-side DIP switch
  • Analog output 4-20 mA
  • With Pt100 sensors, monitoring of sensor break and short-circuit
  • Wide-range power supply
  • Housing width 12.5 mm
  • Removable coded screw terminals
  • Carrier rail mounting TS35 EN60715
  • SKU:
    UT125M
    171,36 € *
    : 11 - 13 Workdays
  • Inputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Outputs: 0/4...20mA  or 0/2...10VDC, each selectable 
  • Auxiliary voltage: 100...265VAC or 10.8...30VAC/DC
  • SKU:
    TV500-10-ff
    Variations in:
    • Auxiliary Voltage
    Item weight:
    0,20 kg
    Auxiliary Voltage 
    261,80 € *
  • safe galvanic isolation between input/output/auxiliary voltage
  • step response T90: 40ms
  • output deviation <0.2% of the limit value
  • overload protection of the current input with automatically resetting fuse
  • operating display and status messages via two-colour LED
  • configuration via front DIP switches
  • plug-in terminal strips
  • slim installation width of 12.5mm for carrier rail mounting TS 35
  • SKU:
    TV125L
    130,90 € *
    : 11 - 13 Workdays
    VT 500-30-, AC Voltage Transmitter
    SKU:
    VT500-30-ff
    Variations in:
    • Supply Voltage:
    Supply Voltage: 
    379,61 € *
  • Resistance measuring range from 0 to 50 Ohm up to 100 kOhm 
  • 12 Bit AD/DA processor technology with 250Hz realtime execution 
  • Teach-in programming for initial and final value 
  • 2- and 3-wire connection
  • Outputs for 0/4-20mA, simultaneous 0/2-10V
  • Increase or decrease output characteristic programmable
  • Operation mode indicated by 2-colour LED
  • 22.5mm case for DIN rail mounting
  • SKU:
    RT500ff
    Variations in:
    • Supply Voltage
    Supply Voltage 
    309,40 € *

    Versions with and without compensating circuits
    Variants for: power supply system 1-or 3-phase; measuring voltage 100/110/230/400 or 440VAC; measuring current 1 or 5AAC; supply voltage 230VAC or 24VDC

    SKU:
    WM500ff
    Variations in:
    • Version
    Version 
    449,82 € - 514,08 € *
  • Compact conductivity measuring cell for drinking/fresh water
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display of the conductivity or the temperature
  • Exchangeable unit labels
  • SKU:
    607815
    618,80 € *
    : 11 - 13 Workdays
  • Compact conductivity measuring cell for drinking/fresh water
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display of the conductivity or the temperature
  • Exchangeable unit labels
  • SKU:
    GLMU200MP-TR
    596,19 € *
    : 11 - 13 Workdays
  • High-quality conductivity measuring cell, insensitive to dirt
  • Output signal freely scalable
  • Adjustable cell constant
  • Selectable temperature compensation mode
  • On site display for the conductivity or temperature
  • Exchangeable unit labels
  • SKU:
    GLMU400MP-SW
    769,93 € *
    : 11 - 13 Workdays
  • measuring ranges: 0.0 to 100.0% O2 (gaseous); -20.0 to +50.0°C
  • output signal: 4-20mA
  • auxiliary energy: 12 -30VDC
  • connection: 5-pin jack connector, screwable
  • SKU:
    OXY3690MP
    721,14 € *
    : 11 - 13 Workdays