Voltage Meter

PQ167 PicoScope 4444, 4-Channel- Differential...

Pico Technology

PQ167 PicoScope 4444, 4-Channel- Differential Oscilloscope Kit for Mains Voltage and Current Measurements

SKU:: PQ167

Kit with probes for max. 1000V CAT III mains voltage and current measurements

4 true differential inputs

flexible and high 12- or 14-bit resolution

20 MHz bandwidth

up to 400 MS/s sampling rate

256 MS capture memory

high common- mode rejection rate

Balanced high-impedance inputs for a low circuit load

intelligent probe interface

Pico Technology

PQ167 PicoScope 4444, 4-Channel- Differential Oscilloscope Kit for Mains Voltage and Current Measurements

3.195,15 € *

Go to item

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 4096, Graphical Bench-Type Multimeter, 5 1/2-digit, USB, LAN, RS-232

SKU:: P4096

5 1/2 digits (200.000 counts) 4" TFT-Graphics Display (480x320 Pixels)

Up to 150 measurments per second

Datalogger for up to 1 Mio. points (internal) or 100 Mio. Points (external) / 5ms Intervall

True RMS measurement up to 100 kHz -depending on meas. function

Automatic and manual range selection,AVG-, MIN/MAX and relative- function

Diode/continuity test and 2- or 3-wire Resistance-Temperature Detector (RTD) or Themocouple measurement

Temperature measurement compatible with: Type-B / E / J / K / N / R / S / T or PT100 / PT385

PeakTech

PeakTech 4096, Graphical Bench-Type Multimeter, 5 1/2-digit, USB, LAN, RS-232

844,78 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PeakTech

PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

SKU:: P3450

True RMS multimeter with 6,000 counts
Data logger and trend display
80 x 80 pixels thermal imaging camera
PC software for thermal image analysis and datalogger
7cm (2.8") multi-line TFT display
Graphical user interface with menu control
Data logger function with graph
Bluetooth interface for data transfer to a mobile phone
Lithium-polymer battery with external charger
IP65 dust-proof and water-resistant
Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V

PeakTech

PeakTech 3450, Digital Multimeter with Thermal Imager, Data Logger, Bluetooth 4.0

831,81 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

ND30IoT, Energy Meter for 1- and 3-Phase Mains Networks,...

LUMEL

ND30IoT, Energy Meter for 1- and 3-Phase Mains Networks, with Colour TFT Display

SKU:

ND30IoTff

Variations in:

Supply Voltage

Measurement of 54 parameters and harmonics up to the 63rd harmonic for current and voltage in symmetrically or asymmetrically loaded single-phase 2-wire systems and three-phase 3-or 4-wire systems.
3.5" colour TFT graphic display, 320 x 240 pixels, user-programmable arangement of parameters in the displays (8 parameters in each of the 10 display pages)
Displays that take into account the values of the programmed turn ratios
Memory for maximum and minimum values
2 configurable alarm outputs
Function of the monitoring relays for alarm outputs, optional: analogue output 0/4-20mA and 2 Pt100 inputs
Optional RS-485 interface - Modbus protocol
Archiving of up to 32 measurement parameters in internal 8GB data memory (optional)
Modern and user-friendly Ethernet 10/100 BASE-T'm interface (otpional):
Protocol: MODBUS TCP/IP, HTTP, FTP, Services: Web servber, FTP server, DHCP
MQTT protocol for IoT applications
Parameter programming via free eCon software
Real time clock (RTC) with battery backup

LUMEL

ND30IoT, Energy Meter for 1- and 3-Phase Mains Networks, with Colour TFT Display

672,59 € - 745,12 € *

Go to item

Available

PeakTech

PeakTech 4095, Graphical Bench-Type Multimeter, 4 1/2-digit, USB, LAN, RS-232

SKU:: P4095

4 1/2 digits (60000 counts) 4" TFT-Graphics Display (480x320 Pixels)

Up to 150 measurments per second

Datalogger for up to 1 Mio. points (internal) or 100 Mio. Points (external) / 5ms Intervall

True RMS measurement up to 100 kHz -depending on meas. function

Automatic and manual range selection,AVG-, MIN/MAX and relative- function

Diode/continuity test and 2- or 3-wire Resistance-Temperature Detector (RTD) or Themocouple measurement

Temperature measurement compatible with: Type-B / E / J / K / N / R / S / T or PT100 / PT385

PeakTech

PeakTech 4095, Graphical Bench-Type Multimeter, 4 1/2-digit, USB, LAN, RS-232

606,78 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

Universal Meter ML2-2 with LCD/TFT Digital Display, 96 x...

PSE Priggen

Universal Meter ML2-2 with LCD/TFT Digital Display, 96 x 96mm²

SKU:

ML2-2ff

Variations in:

Supply Voltage

full graphic LCD display

multi-colour backlight (7 colours selectable)

universal input for current and voltage standard signals, Pt100, Pt1000, thermocouples or pulses

configurable via 4 buttons or via PC software

large AC and DC supply voltage ranges

PSE Priggen

Universal Meter ML2-2 with LCD/TFT Digital Display, 96 x 96mm²

416,50 € *

Go to item

Available

PeakTech

PeakTech 4090, Digital Bench Type Multimeter, 4 1/2 digits

SKU:: P4090

4 1/2-digit, 21 mm LCD-display (max. 22000 counts) with backlight

True RMS

Autoranging and manual range selection

Relative function

DATA-, MAX/MIN-HOLD

Diode-, continuity-test

USB-interface

PeakTech

PeakTech 4090, Digital Bench Type Multimeter, 4 1/2 digits

356,88 € *

Go to item

Available
: 6 - 8 Workdays (DE - int. shipments may differ)

PSE Priggen

Bargraph & Digital Display, Panel Meter, 96x24mm²

SKU:

MB-3ff

Variations in:

Mounting/auxiliary voltage

combo panel meter for 0-300VDC and 0-1ADC

red 3-digit digital display -199...999 digits (optional green display)

30-points-bargraph tricolour

adjustable bargraph or dot operation or operation with permanent display of the midpoint

installation depth: 120 mm without plug-in screw terminal

version with multi voltage power supply: 100-240VAC/DC,

verison for low voltage supply: 10-40VDC /18-30VAC

display adjustment via factory setting or directly via sensor signal

min/max-memory with adjustable permanent display

30 additional adjustable supporting points

display flashing at threshold value exceedance/undercut

zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation

flexible alarm system with adjustable delay times

volume metering (Totaliser)

mathematic functions like reciprocal value, root extraction, squaring and rounding

sliding averaging

programming interlock via access code

protection class IP65 at the front

plug-in screw terminal

PSE Priggen

Bargraph & Digital Display, Panel Meter, 96x24mm²

347,48 € *

Go to item

Available

N32P, Programmable Panel Meter for 1-Phase Power Network...

LUMEL

N32P, Programmable Panel Meter for 1-Phase Power Network Parameters, 96 x 48mm

SKU:

N32Pff

Variations in:

Supply Voltage/Additional Outputs

Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
Current and voltage harmonics analysis up to 51st (measurements available via RS-485).
Two-line LCD display with high contrast and built-in backlighting
Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V)
High sampling frequency of measured signals
Programming parameters via buttons or RS-485 interface and free e-con software
4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
Possibility to program each of the alarms to react to a different measurements
Pulse output to control energy consumption
Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
Memory of minimal and maximal values for all measured quantities
Mounting dimensions: 96 x 48 x 93mm

LUMEL

N32P, Programmable Panel Meter for 1-Phase Power Network Parameters, 96 x 48mm

332,85 € - 421,95 € *

Go to item

Available

N32U, Programmable Panel Meter for Temperature,...

LUMEL

N32U, Programmable Panel Meter for Temperature, Resistance and Standard Signals, 96 x 48mm

SKU:

N32Uff

Variations in:

Supply Voltage/Additional Outputs

Multi-purpose input for measuring: temperature, resistance, standard signals
Two-line LCD display with high contrast and built-in backlighting
Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
Storage of minimal and maximal values for all measured quantities
Supply of object transducers
32-point individual characteristic for the measured value
Mathematical functions for converting the measured value
Mounting dimensions: 96 x 48 x 93mm

LUMEL

N32U, Programmable Panel Meter for Temperature, Resistance and Standard Signals, 96 x 48mm

332,85 € - 421,95 € *

Go to item

Available

Voltage Meters: Precise Measurement for Various Applications

In the Voltage Meters category, you will find high-quality solutions for accurately measuring voltage values in electrical circuits. Whether for use in schools, workshops, or professional applications – you can find the right voltage meter to buy here.

Buying a Voltage Meter: Important Criteria

A voltage meter is an essential tool for troubleshooting, testing, and analyzing electrical systems. When selecting one, consider the following aspects:

Measurement Range: Choose a device that can precisely measure the voltages you need, e.g., voltage meters for 12V systems.
Accuracy: Pay attention to the specified tolerance to ensure precise measurement results.
Additional Functions: Some models offer extended features like current measurement, resistance measurement, or capacitance measurement.
Application Area: Some models are optimized for use in schools or educational institutions.

Voltage Meter for Schools: Easy to Use and Durable

A voltage meter for schools must be easy to use, durable, and safe. Our models for the educational sector are ideal for experiments and physics lessons. They offer an intuitive interface and reliable results, making it easier for students to understand electrical fundamentals.

12V Voltage Meter: Perfect for Low Voltage Systems

12V voltage meters are specifically designed for automotive technology, solar systems, or other low-voltage applications. These devices allow quick and accurate checking of battery voltages or circuits to ensure the proper functioning of the systems.

Multimeter: Measure Voltage and More

A multimeter is a versatile measuring instrument that, in addition to voltage measurement, also offers features like current and resistance measurement. With a multimeter, you can reliably and efficiently measure voltage while simultaneously analyzing other parameters of your electrical circuits. Our multimeters are suitable for both professional use and hobbyists.

Advantages of Our Voltage Meters

Precision: Accurate measurement values for reliable analysis.
Durability: High-quality devices that remain ready for use even under demanding conditions.
Versatility: Suitable for a wide range of applications – from education to industry.

Why Buy Voltage Meters from PSE Priggen?

At PSE Priggen, you will find a wide selection of voltage meters that meet the highest quality standards. Our range includes:

Devices from leading manufacturers with proven precision
Models for specific applications like schools or 12V systems
Expert advice from our measurement technology professionals

Explore our selection now and buy the ideal voltage meter for your needs. Whether you are looking for a device for school, a 12V voltage meter, or a versatile multimeter – PSE Priggen has the right solution. Trust our expertise in measurement technology!