Voltage Meter

PSE Priggen

LED Bargraph Display, Horizontal, 96 x 24mm

SKU:

MB1-33RHOff

Variations in:

Supply Voltage

Item weight:

0,09 kg

30 segments bargraph display
horizontal front panel mounting, 24 x 96mm
segment colour: red/green selectable, optionally blue/red, orange/green
small mounting depth: 60mm without the pluggable screw terminal
parametrization via HEX switch and push button
factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA
free adjustment at the input signal possible
8 different types of presentation, parametrizable as bar, dot/point or curtain
free direction selection and central display (for example, beams out of the centre)
stepwise brightness control
protection rate IP65 on the front
plug-in screw terminal

PSE Priggen

LED Bargraph Display, Horizontal, 96 x 24mm

207,06 € *

Go to item

Available

PSE Priggen

LED Bargraph Display, Vertical, 24 x 96mm

SKU:

MB1-33RVOff

Variations in:

Supply Voltage

Item weight:

0,09 kg

30 segments bargraph display
vertical front panel mounting, 24 x 96mm
segment colour: red/green selectable, optionally blue/red, orange/green
small mounting depth: 60mm without the pluggable screw terminal
parametrization via HEX switch and push button
factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA
free adjustment at the input signal possible
8 different types of presentation, parametrizable as bar, dot/point or curtain
free direction selection and central display (for example, beams out of the centre)
stepwise brightness control
protection rate IP65 on the front
plug-in screw terminal

PSE Priggen

LED Bargraph Display, Vertical, 24 x 96mm

207,06 € *

Go to item

Available

PSE Priggen

Bargraph & Digital Display, Panel Meter, 96x24mm²

SKU:

MB-3ff

Variations in:

Mounting/auxiliary voltage

combo panel meter for 0-300VDC and 0-1ADC

red 3-digit digital display -199...999 digits (optional green display)

30-points-bargraph tricolour

adjustable bargraph or dot operation or operation with permanent display of the midpoint

installation depth: 120 mm without plug-in screw terminal

version with multi voltage power supply: 100-240VAC/DC,

verison for low voltage supply: 10-40VDC /18-30VAC

display adjustment via factory setting or directly via sensor signal

min/max-memory with adjustable permanent display

30 additional adjustable supporting points

display flashing at threshold value exceedance/undercut

zero key for the triggering of Hold, Tara, display change, setpoint setting, alarm actuation

flexible alarm system with adjustable delay times

volume metering (Totaliser)

mathematic functions like reciprocal value, root extraction, squaring and rounding

sliding averaging

programming interlock via access code

protection class IP65 at the front

plug-in screw terminal

PSE Priggen

Bargraph & Digital Display, Panel Meter, 96x24mm²

347,48 € *

Go to item

Available

PSE Priggen

M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²

SKU:: M1-7UR4A.000X.372AD

universal measuring input for DC voltage, DC current, Pt100(0), thermocouple, frequency, rotational speed, counter

red display of -1999 to +9999 eigits

low installation depth

digit heigth 10mm

Min/max- walue capture

5 parameterizable support points

indicator flashes when the limit valus are exceeded

tare function

PSE Priggen

M1, Digital LED Panel Meter, 4-Digits, with Universal Measuring Input, 48 x 24mm²

189,57 € *

Go to item

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

LUMEL

N20ZPLUS, Panel Meter for AC Current, AC Voltage and Frequency, with RS-485, 96 x 48mm

SKU:

N20ZPLUSff

Variations in:

Input Type / Supply Voltage

Measurement of voltage, a.c. current or frequency
Three-colour LED display (5 digits, 14 mm high)
Digital output RS-485 - Modbus RTU protocol.
Two alarm outputs of OC type.
Programmable parameters through RS-485 interface using the free eCon software

LUMEL

N20ZPLUS, Panel Meter for AC Current, AC Voltage and Frequency, with RS-485, 96 x 48mm

154,22 € *

Go to item

Available

LUMEL

N21, Panel Meter with OLED Graphic Display for Temperature and Standard Signals

SKU:: N21 00M0

Panel mounting
Universal input (measurement of temperature and standard signals)
New range for DC voltage measurements: ±75mV
Relay alarm output
Universal power supply from 24 to 230VAC/DC
Supply output for external transducers: 24VDC
OLED graphic display, horizontally or vertically configurable
Configuration of the meter via mini USB interface via the free eCon software

LUMEL

N21, Panel Meter with OLED Graphic Display for Temperature and Standard Signals

141,88 € *

Go to item

Available
: 11 - 13 Workdays (DE - int. shipments may differ)

LUMEL

N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm

SKU:

N30Hff

Variations in:

Supply Voltage / Output Option

Measurement: current and DC voltage up to 5A and 600V
Three-colour display (14mm high), programmed in three intervals of the measured value
Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
Four alarm outputs with signalling by LED diodes, operating in 6 different modes
Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
Storage of minimal and maximal values for all measured quantities
21-point individual characteristic for the measured value

LUMEL

N30H, Panel Meter for DC Current and DCVoltage, 96 x 48mm

195,86 € - 289,94 € *

Go to item

Available

N32P, Programmable Panel Meter for 1-Phase Power Network...

LUMEL

N32P, Programmable Panel Meter for 1-Phase Power Network Parameters, 96 x 48mm

SKU:

N32Pff

Variations in:

Supply Voltage/Additional Outputs

Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
Current and voltage harmonics analysis up to 51st (measurements available via RS-485).
Two-line LCD display with high contrast and built-in backlighting
Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V)
High sampling frequency of measured signals
Programming parameters via buttons or RS-485 interface and free e-con software
4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
Possibility to program each of the alarms to react to a different measurements
Pulse output to control energy consumption
Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
Memory of minimal and maximal values for all measured quantities
Mounting dimensions: 96 x 48 x 93mm

LUMEL

N32P, Programmable Panel Meter for 1-Phase Power Network Parameters, 96 x 48mm

332,85 € - 421,95 € *

Go to item

Available

N32U, Programmable Panel Meter for Temperature,...

LUMEL

N32U, Programmable Panel Meter for Temperature, Resistance and Standard Signals, 96 x 48mm

SKU:

N32Uff

Variations in:

Supply Voltage/Additional Outputs

Multi-purpose input for measuring: temperature, resistance, standard signals
Two-line LCD display with high contrast and built-in backlighting
Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
Storage of minimal and maximal values for all measured quantities
Supply of object transducers
32-point individual characteristic for the measured value
Mathematical functions for converting the measured value
Mounting dimensions: 96 x 48 x 93mm

LUMEL

N32U, Programmable Panel Meter for Temperature, Resistance and Standard Signals, 96 x 48mm

332,85 € - 421,95 € *

Go to item

Available

LUMEL

ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm

SKU:

ND10ff

Variations in:

Input Current

Measurements of up to 52 mains network parameters

Power supply via the measuring circuit

The displays take into account the values of programmed transformation ratios for upstream instrument transducers

Modbus RS-485 communication interface

Free eCon software

Two alarm outputs

Pulse output

Backlit 3.5" LCD display

3 years warranty

LUMEL

ND10, Inexpensive 3-Phase Panel Multimeter, 96 x 96mm

212,13 € *

Go to item

Available

Voltage Meters: Precise Measurement for Various Applications

In the Voltage Meters category, you will find high-quality solutions for accurately measuring voltage values in electrical circuits. Whether for use in schools, workshops, or professional applications – you can find the right voltage meter to buy here.

Buying a Voltage Meter: Important Criteria

A voltage meter is an essential tool for troubleshooting, testing, and analyzing electrical systems. When selecting one, consider the following aspects:

Measurement Range: Choose a device that can precisely measure the voltages you need, e.g., voltage meters for 12V systems.
Accuracy: Pay attention to the specified tolerance to ensure precise measurement results.
Additional Functions: Some models offer extended features like current measurement, resistance measurement, or capacitance measurement.
Application Area: Some models are optimized for use in schools or educational institutions.

Voltage Meter for Schools: Easy to Use and Durable

A voltage meter for schools must be easy to use, durable, and safe. Our models for the educational sector are ideal for experiments and physics lessons. They offer an intuitive interface and reliable results, making it easier for students to understand electrical fundamentals.

12V Voltage Meter: Perfect for Low Voltage Systems

12V voltage meters are specifically designed for automotive technology, solar systems, or other low-voltage applications. These devices allow quick and accurate checking of battery voltages or circuits to ensure the proper functioning of the systems.

Multimeter: Measure Voltage and More

A multimeter is a versatile measuring instrument that, in addition to voltage measurement, also offers features like current and resistance measurement. With a multimeter, you can reliably and efficiently measure voltage while simultaneously analyzing other parameters of your electrical circuits. Our multimeters are suitable for both professional use and hobbyists.

Advantages of Our Voltage Meters

Precision: Accurate measurement values for reliable analysis.
Durability: High-quality devices that remain ready for use even under demanding conditions.
Versatility: Suitable for a wide range of applications – from education to industry.

Why Buy Voltage Meters from PSE Priggen?

At PSE Priggen, you will find a wide selection of voltage meters that meet the highest quality standards. Our range includes:

Devices from leading manufacturers with proven precision
Models for specific applications like schools or 12V systems
Expert advice from our measurement technology professionals

Explore our selection now and buy the ideal voltage meter for your needs. Whether you are looking for a device for school, a 12V voltage meter, or a versatile multimeter – PSE Priggen has the right solution. Trust our expertise in measurement technology!