• 28mm, 3 1/2-digit LCD display (max. 1999) with backlight
• Manual range selection
• hFE transistor test
• Capacity measurement up to 200µF
• Inductivity measurement up to 20 H
• Peak hold
• Temperature measurement using type-K probe
• Fast continuity test and diode test
• Auto power off and low battery indication
• Security: EN 61010-1; CAT III 1000V

4 4/5 digit (55,000 counts) 3.7 "TFT graphic display (480x320 pixels)
Up to 65 readings per second
Internal data recording for up to 1000 measuring points
Minimum, maximum and measured value hold function
AVG average measurement and relative value function
dB and dBm measuring function for ACV and DCV measuring range
Dual function for simultaneous measurements of two measuring functions
Diode test & continuity test
RS-232 interface for data transmission
Control and data transfer possible via SCPI protocol
Safety: EN 61010-1; CAT I 1000V / CAT II 600V

• Measuring range: 6 -690V AC/DC
• Backlight bar graph LCD display
• Integrated continuity test
• Residual current circuit breaker test (FI / RCD
• Acoustic signal
• TÜV/GS tested

• Measurement of voltage, a.c. current or frequency
• Three-colour LED display (5 digits, 14 mm high)
• Digital output RS-485 - Modbus RTU protocol.
• Two alarm outputs of OC type.
• Programmable parameters through RS-485 interface using the free eCon software

• Measurement: current and DC voltage up to 5A and 600V
• Three-colour display (14mm high), programmed in three intervals of the measured value
• Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
• Four alarm outputs with signalling by LED diodes, operating in 6 different modes
• Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
• Storage of minimal and maximal values for all measured quantities
• 21-point individual characteristic for the measured value

• Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485). 
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
• Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V) 
• High sampling frequency of measured signals
• Programming parameters via buttons or RS-485 interface and free e-con software
• 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
• Possibility to program each of the alarms to react to a different measurements 
• Pulse output to control energy consumption
• Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
• Memory of minimal and maximal values for all measured quantities
• Mounting dimensions: 96 x 48 x 93mm

• Multi-purpose input for measuring: temperature, resistance, standard signals
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
• Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
• 4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
• Storage of minimal and maximal values for all measured quantities
• Supply of object transducers
• 32-point individual characteristic for the measured value
• Mathematical functions for converting the measured value
• Mounting dimensions: 96 x 48 x 93mm

• Automatic illuminated function keys and rotary switch
• Integrated powerful LED flashlight
• Bluetooth 4.0 interface for data transfer to Android or iOS smartphones
• TrueRMS measurements
• ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
• 3 5/6-digits measurement value display (max. 5999)
• LCD display with relative-value measurement and 42-segment bargraph
• Continuity with buzzer and diode test
• Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
• Heavy duty case, IP67 dust and waterproof
• Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
• New App for "Vuzix" Augmented Reality Smart Glasses available

• True RMS multimeter with 6,000 counts
• Data logger and trend display
• 80 x 80 pixels thermal imaging camera
• PC software for thermal image analysis and datalogger
• 7cm (2.8") multi-line TFT display
• Graphical user interface with menu control
• Data logger function with graph
• Bluetooth interface for data transfer to a mobile phone
• Lithium-polymer battery with external charger
• IP65 dust-proof and water-resistant
• Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V

• Panel mounting
• Universal input (measurement of temperature and standard signals)
• New range for DC voltage measurements: ±75mV
• Relay alarm output
• Universal power supply from 24 to 230VAC/DC
• Supply output for external transducers: 24VDC
• OLED graphic display, horizontally or vertically configurable
• Configuration of the meter via mini USB interface via the free eCon software