Current Meter

• 28mm, 3 1/2-digit LCD display (max. 1999) with backlight
• Manual range selection
• hFE transistor test
• Capacity measurement up to 200µF
• Inductivity measurement up to 20 H
• Peak hold
• Temperature measurement using type-K probe
• Fast continuity test and diode test
• Auto power off and low battery indication
• Security: EN 61010-1; CAT III 1000V

• Connection to oscilloscope or multimeter
• Measuring ranges: 5Apeak and 50Apeak AC/DC
• Output signal: 200mV/A and 20mV/A
• Bandwidth: DC to 500kHz
• Clamp opening: 11mm

• Connection to oscilloscope or multimeter
• Measuring ranges: 7Apeak and 70Apeak AC/DC
• Output signal: 500mV/A and 50mV/A
• Bandwidth: DC to 1MHz
• Clamp opening: 10.3mm

• Connection to oscilloscope or multimeter
• Measuring ranges: 4Apeak and 40Apeak AC/DC
• Output signal: 1000mV/A and 100mV/A
• Bandwidth: DC to 1.5MHz
• Clamp opening: 10.3mm

• Connection to oscilloscope or multimeter
• Measuring ranges: 10Apeak and 100Apeak AC/DC
• Output signal: 100mV/A and 10mV/A
• Bandwidth: DC to 300kHz
• Clamp opening: 11mm

4 measuring ranges: 40A AC, 40A DC, 400A AC and 400A DC

Clamp opening: 20mm

Current value is converted into a voltage signal

4 measuring ranges: 200A AC, 200A DC, 600A AC and 600A DC

Clamp opening: 30mm

Current value is converted into a voltage signal

4 measuring ranges: 20A AC, 20A DC, 80A AC and 80A DC

Clamp opening: 12.5mm

Current value is converted into a voltage signal

• For conductors with a maximum diameter of 160mm
• Measuring ranges 30/300/3000 A AC switchable
• Flexible measuring coil, closure can be opened on one side
• Measurement in conjunction with an existing multimeter
• 1m connecting cable with 4mm banana plugs
• Touch protection

4 4/5 digit (55,000 counts) 3.7 "TFT graphic display (480x320 pixels)
Up to 65 readings per second
Internal data recording for up to 1000 measuring points
Minimum, maximum and measured value hold function
AVG average measurement and relative value function
dB and dBm measuring function for ACV and DCV measuring range
Dual function for simultaneous measurements of two measuring functions
Diode test & continuity test
RS-232 interface for data transmission
Control and data transfer possible via SCPI protocol
Safety: EN 61010-1; CAT I 1000V / CAT II 600V

• Measurement of voltage, a.c. current or frequency
• Three-colour LED display (5 digits, 14 mm high)
• Digital output RS-485 - Modbus RTU protocol.
• Two alarm outputs of OC type.
• Programmable parameters through RS-485 interface using the free eCon software

• Measurement: current and DC voltage up to 5A and 600V
• Three-colour display (14mm high), programmed in three intervals of the measured value
• Meter programming from the keyboard or through the RS-485 interface by means of the free delivered eCon software
• Four alarm outputs with signalling by LED diodes, operating in 6 different modes
• Conversion of any measured value into a 0/4...20mA, or 0...10V analog signal
• Storage of minimal and maximal values for all measured quantities
• 21-point individual characteristic for the measured value

• Voltage measurement ±600V (maximum range display ±1200V), current measurement via shunt, power, energy and capacity measurement of DC circuits
• two-line LCD display with high contrast and built-in backlighting
• possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
• Wide range of voltage measurement at the shunt input up to 1500 mV
• high sampling frequency of measured signals
• programming parameters via buttons or RS-485 interface and free e-con software
• 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
• pulse output to control energy consumption
• conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
• memory of minimal and maximal values for all measured quantities
• automatic voltage measurement compensation function
• Mounting dimensions: 96 x 48 x 93mm

• Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cos phi, tan phi, frequency, active, reactive and apparent energy, active power 15 minutes, voltage 10 minutes
• Current and voltage harmonics analysis up to 51st (measurements available via RS-485). 
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an second measured value or unit (automatically displayed unit of measured quantity)
• Programmable measuring range (current 1 A / 5 A and voltage 100 V /230 V / 400 V) 
• High sampling frequency of measured signals
• Programming parameters via buttons or RS-485 interface and free e-con software
• 4 alarm outputs with signaling on LEDs, working in 7 different modes (option)
• Possibility to program each of the alarms to react to a different measurements 
• Pulse output to control energy consumption
• Conversion of any measured value into an analog signal 0/4-20 mA or 0-10V (option)
• Memory of minimal and maximal values for all measured quantities
• Mounting dimensions: 96 x 48 x 93mm

• Multi-purpose input for measuring: temperature, resistance, standard signals
• Two-line LCD display with high contrast and built-in backlighting
• Possibility of displaying the measured value and time simultaneously or an uncalculated quantity or unit (programmable unit of measured quantity)
• Meter programming from keyboard or through the RS-485 interface by means of the free eCon software
• 4 alarm outputs with signalling on LED diodes, working in 7 different modes (option)
• Conversion of any measured value into an analog signal 0/4...20 mA or 0...10 V (option)
• Storage of minimal and maximal values for all measured quantities
• Supply of object transducers
• 32-point individual characteristic for the measured value
• Mathematical functions for converting the measured value
• Mounting dimensions: 96 x 48 x 93mm

• Low–battery indicator 
• Zero offset button
• BNC type connectors
• Screened lead for noise suppression

• Automatic illuminated function keys and rotary switch
• Integrated powerful LED flashlight
• Bluetooth 4.0 interface for data transfer to Android or iOS smartphones
• TrueRMS measurements
• ACV, ACV+DCV, DCV measurement and Low Impedance (Lo Z)
• 3 5/6-digits measurement value display (max. 5999)
• LCD display with relative-value measurement and 42-segment bargraph
• Continuity with buzzer and diode test
• Data-Hold, Min, Max, Peak function and Duty Cycle (Hz / %)
• Heavy duty case, IP67 dust and waterproof
• Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
• New App for "Vuzix" Augmented Reality Smart Glasses available

• Panel mounting
• Universal input (measurement of temperature and standard signals)
• New range for DC voltage measurements: ±75mV
• Relay alarm output
• Universal power supply from 24 to 230VAC/DC
• Supply output for external transducers: 24VDC
• OLED graphic display, horizontally or vertically configurable
• Configuration of the meter via mini USB interface via the free eCon software

• Measurement of 54 parameters and harmonics up to the 63rd harmonic for current and voltage in symmetrically or asymmetrically loaded single-phase 2-wire systems and three-phase 3-or 4-wire systems.
• 3.5" colour TFT graphic display, 320 x 240 pixels, user-programmable arangement of parameters in the displays (8 parameters in each of the 10 display pages)
• Displays that take into account the values of the programmed turn ratios
• Memory for maximum and minimum values
• 2 configurable alarm outputs
• Function of the monitoring relays for alarm outputs, optional: analogue output 0/4-20mA and 2 Pt100 inputs
• Optional RS-485 interface - Modbus protocol
• Archiving of up to 32 measurement parameters in internal 8GB data memory (optional)
• Modern and user-friendly Ethernet 10/100 BASE-T'm interface (otpional):
• Protocol: MODBUS TCP/IP, HTTP, FTP, Services: Web servber, FTP  server, DHCP
• MQTT protocol for IoT applications
• Parameter programming via free eCon software
• Real time clock (RTC) with battery backup

• 30A AC/DC Large Jaw Current Clamp
• large bandwidth: DC to 100kHz
• BNC connector
• closed loop control system for better accuracy

• 30 segments bargraph display
• vertical front panel mounting, 24 x 96mm 
• segment colour: red/green selectable, optionally blue/red, orange/green  
• small mounting depth: 60mm without the pluggable screw terminal
• parametrization via HEX switch and  push button 
• factory preadjusted input for standard signal 0 to 10V and 0/4 to 20mA 
• free adjustment at the input signal possible 
• 8 different types of presentation, parametrizable as bar, dot/point or curtain  
• free direction selection and central display (for example, beams out of the centre) 
• stepwise brightness control 
• protection rate IP65 on the front
• plug-in screw terminal